Models > 13A-325-190

13A-325-190 MTD Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
Order now and your part arrives by Mar 23
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with...
In Stock
Order now and your part arrives by Mar 23
In Stock
Order now and your part arrives by Mar 23
This is a genuine replacement part produced by original manufacturer. It is used in various tractors from MTD, Yard Machines, Bolens, and Yard Man. Flange bearings facilitate spinning axles/shafts and...
In Stock
Order now and your part arrives by Mar 23
On Order
In Stock
Order now and your part arrives by Mar 23
In Stock
Order now and your part arrives by Mar 23
This is an original Craftsman replacement part. The carriage screw is designed by the manufacturer for use in snowblowers and lawn tractors. This part is made of metal, and may be found in various l...
In Stock
Order now and your part arrives by Mar 23
In Stock
Order now and your part arrives by Mar 23
This is an authentic OEM part. The hardened metal, flat washer is compatible with a variety of tiller and tractor machines. The washer is most often fitted between the screw plug and the deck assembly...
On Order
It is a genuine item that is supplied by the original manufacturer for use with a variety of lawn and garden equipment. A washer is a special part which helps to provide a tight fit between connected ...
On Order
This is a genuine OEM part. The int. cotter pin 5/16 & #34 dia. is constructed of durable metal. The part is compatible with a variety of lawn and garden tools and machines. It is recommended to refer...
Special Order

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
LISA M from BATESVILLE, AR
Parts Used:
737-0300A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do es not make the slight howl sound.
6 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!