Models
>
185-070-000
185-070-000 (1985) MTD Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 185-070-000
Viewing 1 of 1_WW_1.gif "Parts Diagram and Parts List for 1985 MTD Lawn Mower")
Keep searches simple, eg. "belt" or "pump".
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex s...
In Stock
Order now and your part arrives by Nov 3
$6.55
If the shafts in the drive belt pulley assembly spin freely when they should remain locked together, this lock washer may need replacement. The silver metal washer maintains tension on the pulley shaf...
In Stock
Order now and your part arrives by Nov 3
In Stock
Order now and your part arrives by Nov 3
$42.91
This is the lower handle for various models of walk-behind lawn mowers. This handle is made of durable black metal and attaches directly to the rear of the lawn mower. This handle is an OEM part that ...
In Stock
Order now and your part arrives by Nov 3
$6.51
This is an authentic replacement washer which is sourced directly from the original equipment manufacturer for use with lawn and garden equipment. It is a standard hardware which may have multiple app...
In Stock
Order now and your part arrives by Nov 3
$6.51
This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi and MTD lawn and garden equipment. It is a standard hardware which may have multiple application...
On Order
In Stock
Order now and your part arrives by Nov 3
In Stock
Order now and your part arrives by Nov 3
In Stock
Order now and your part arrives by Nov 3
In Stock
Order now and your part arrives by Nov 3
$9.81
This is a genuine item that is supplied directly from the original equipment manufacturer for use with MTD lawn and garden equipment. It is a standard hardware which has multiple applications dependin...
In Stock
Order now and your part arrives by Nov 3
In Stock
Order now and your part arrives by Nov 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from PITTSBURGH, PA
- Parts Used:
- 731-1029
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear
... Read more
as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Was this instruction helpful to you?
Thank you for voting!