Models
>
12A-263B033
12A-263B033 (1999) MTD Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 12A-263B033
Viewing 2 of 2Keep searches simple, eg. "belt" or "pump".
$4.99
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from PITTSBURGH, PA
- Parts Used:
- 731-1029
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear
... Read more
as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Was this instruction helpful to you?
Thank you for voting!