Models > 11084S

11084S (1985) MTD Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 11084S

Viewing 1 of 1
Page A Diagram and Parts List for 1985 MTD Lawn Mower
Page A
Keep searches simple, eg. "belt" or "pump".
Bell. Wash. .340 I.D. x .872 O.D. – Part Number: 736-0242
$4.99
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex s...
In Stock
Order within the next 11 hrs and your part ships today!
Star Knob 5/16-18 – Part Number: 720-04072A
$6.64
This star knob specifically fits a variety of lawn mowers and is used to secure both the lower and upper handles of your lawn mower. If your knob is worn out or loose, then replacing it will solve you...
In Stock
Order within the next 11 hrs and your part ships today!
Lever & Knob Assembly – Part Number: 94832
$10.36
In Stock
Order within the next 11 hrs and your part ships today!
Ball Bearing, 17 X 40 X 12 – Part Number: 941-0600
$25.51
In Stock
Order within the next 11 hrs and your part ships today!
Bell-Wash. .40" I.D. x .88" O.D. – Part Number: 736-0105
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
Carriage Bolt 5/16-18 x 2" – Part Number: 710-1174
$6.86
In Stock
Order within the next 11 hrs and your part ships today!
Discharge Chute – Part Number: 931-1034B
$69.78
In Stock
Order within the next 11 hrs and your part ships today!
Hex Wash. Scr. 1/4-14 x .625" Lg. – Part Number: 710-0896
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
Screw, 3/8-16, 2.00, Gr5 – Part Number: 710-3144
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
TT Sems Screw 3/8-16 X 1.0" – Part Number: 710-0654A
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
Height Adjustment Plate – Part Number: 787-01290A
$11.67
In Stock
Order within the next 11 hrs and your part ships today!
Ball Bearing – Part Number: 941-0484
$7.58
Special Order
View More

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
David from PITTSBURGH, PA
Parts Used:
731-1029
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More