Models
>
12AVB2RQ719
12AVB2RQ719 (2017) MTD Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 12AVB2RQ719
Viewing 14 of 14
Keep searches simple, eg. "belt" or "pump".
$21.66
This is an authentic 51-inch control cable for walk-behind lawn mowers. This part is made up of a metal wire cable with a Z-type bent end on either side, and a 37.5-inch rubberized outer cover. When t...
Special Order
$25.20
Genuine OEM replacement part, this part is sold individually. This is the Side Discharge Chute for the lawn mowers listed below. It is mounted to the side of the mower for the cut grass to be expelled...
Special Order
$6.51
This is a bell blade support, also known as a bell spacer, for your lawn mower. It is fitted between the bottom of the blade, and the blade bolt. This part provides support for the blade. It is made o...
In Stock
Order now and your part arrives by Apr 9
$59.91
This is an authentic manufacturer-sourced replacement part which is specially designed for use with Craftsman lawn mowers. The grass bag frame supports and hold the grass bag in place, while it is col...
In Stock
Order now and your part arrives by Apr 9
The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of meta...
In Stock
Order now and your part arrives by Apr 9
In Stock
Order now and your part arrives by Apr 9
$6.51
This is a genuine OEM sourced replacement part is designed for use with walk behind/push lawn mowers. This hinge pin is an important part of a mechanism which allows users to secure the mulch door or ...
In Stock
Order now and your part arrives by Apr 9
$11.56
This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with lawn mowers. It allows for the mulching door to retract. This torsion spring is made out of metal...
In Stock
Order now and your part arrives by Apr 9
$53.57
This authentic component is sourced directly from the original equipment manufacturer. It is specially designed for use with push lawn mowers. It is an identical replacement for a damaged or a missing...
In Stock
Order now and your part arrives by Apr 9
$6.58
This shoulder screw is sourced directly from original equipment manufacturer. It is an authentic item specially designed for use with a variety of lawn and garden equipment. It is commonly used to sec...
Special Order
$6.58
This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple...
In Stock
Order now and your part arrives by Apr 9
In Stock
Order now and your part arrives by Apr 9
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Dan from LAKEWOOD, OH
- Parts Used:
- 710-04995A, 731-07487
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I replaced the deck on my Craftsman Lawn Mower, and needed a new water nozzle and some screws to hold the front wheel assembly on.
I removed the rear wheels, then I removed the blade, then the motor, then the front wheel assembly. The bolts holding the front wheel assembly were rusted and rounded trying to remove them, so I cut them out with a grinder. Afterwards I removed the remainder of the screw with a pair of pliers. I also removed the Water jet cleanout nozz
... Read more
le, found it was cracked, ordered the part from PartSelect, along with the screws needed to attach the front wheel assembly. I cleaned the remaining parts and re installed them onto the new deck. First, I installed the front wheel assembly, then the motor, then sat the mower upright, installed the blade, then took the rear wheel assembly and aligned it and fastened it to the deck. Last piece was the water nozzle. I placed it in the recess for it, and fastened it with the bolt. Then I tested the mower, and it worked without issue. Afterwards I used the new clean out port to rinse the underside of the deck, and it worked well.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Douglas from LANGHORNE, PA
- Parts Used:
- 787-01872C-0638
- Difficulty Level:
- Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Socket set
Although the Original deck was rusted and collapsing , the mower was extremely reliable.
Anyone attempting this probably doesn’t need my tutorial but I would add this: closely inspect, clean and repair or replace any hardware as needed. You’ll be glad you did.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- STEPHEN from ROME, NY
- Parts Used:
- 787-01872C-0638
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
My mower deck rotted out.
I purchased a new deck and it was a perfect fit thanks to the woman that I spoke with on the phone. And the price was great along with the shipping. Thanks for everything.
Was this instruction helpful to you?
Thank you for voting!