Models
>
125-222-031
125-222-031 (1985) MTD Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 125-222-031
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex s...
In Stock
Order now and your part arrives by Apr 23
$17.29
This is a genuine manufacturer approved replacement item. It is supplied directly from original equipment manufacturer for use with walk-behind push mowers. This is the spring lever and knob assembly ...
In Stock
Order now and your part arrives by Apr 23
$6.51
This is an authentic replacement washer which is sourced directly from the original equipment manufacturer for use with lawn and garden equipment. It is a standard hardware which may have multiple app...
In Stock
Order now and your part arrives by Apr 23
$6.51
This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi and MTD lawn and garden equipment. It is a standard hardware which may have multiple application...
In Stock
Order now and your part arrives by Apr 23
In Stock
Order now and your part arrives by Apr 23
This is a genuine manufacturer-approved replacement carriage bolt designed for use with lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of y...
No Longer Available
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from PITTSBURGH, PA
- Parts Used:
- 731-1029
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear
... Read more
as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Was this instruction helpful to you?
Thank you for voting!