Models > 10640C

10640C (310000001-310999999 - 2010) Lawn Boy Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Bolt-Shoulder – Part Number: 614650
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
Nut-Lock, Ni – Part Number: 3296-29
$3.99
This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It ...
In Stock
Order within the next 11 hrs and your part ships today!
Cable-Brake – Part Number: 112-8818
$37.00
In Stock
Order within the next 11 hrs and your part ships today!
Guide-Cable – Part Number: 114-7988
$3.99
In Stock
Order within the next 11 hrs and your part ships today!
Bolt-Blade – Part Number: 125-2466
$3.99
In Stock
Order within the next 11 hrs and your part ships today!
Screw-Taptite – Part Number: 95-1726
$3.99
In Stock
Order within the next 11 hrs and your part ships today!
Knob-Lever, Hoc – Part Number: 105-3042
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
Screw-Hwh – Part Number: 46-8091
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
Knob-Handle, Locking – Part Number: 117-5976
$3.99
In Stock
Order within the next 11 hrs and your part ships today!
Washer – Part Number: 40-1940
$3.99
In Stock
Order within the next 11 hrs and your part ships today!
Support-Blade – Part Number: 108-3766-03
$11.20
In Stock
Order within the next 11 hrs and your part ships today!
Screw-Carr – Part Number: 3229-11
$3.99
In Stock
Order within the next 11 hrs and your part ships today!
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ray from YARDLEY, PA
Parts Used:
105-1809
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set, Wrench set
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.

Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
3 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More