Models > 22242

22242 Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Models for 22242

Keep searches simple, eg. "belt" or "pump".
This part includes one lock nut for a snowblower. This nut is part of the frame assembly and is used to tightly secure a bolt and prevent it from loosening. This OEM lock nut is sourced right from the...
In Stock
Order now and your part arrives by Nov 22
This is a nut, for a variety of outdoor lawn equipment. This part is a nylon insert locking nut, meaning it has a nylon collar insert that makes the nut resistant to turning from heavy vibrations. It ...
In Stock
Order now and your part arrives by Nov 22
This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams ...
In Stock
Order now and your part arrives by Nov 22
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of r...
In Stock
Order now and your part arrives by Nov 22
This authentic manufacturer-sourced screw-taptite is made for use with Toro and Lawn-Boy lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installe...
In Stock
Order now and your part arrives by Nov 22
This is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The plastic pivot stop attaches to the upper handle and is used ...
In Stock
Order now and your part arrives by Nov 22
This is a genuine manufacturer-approved replacement locknut, it is commonly utilised on Toro lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model...
In Stock
Order now and your part arrives by Nov 22
$6.55
This item has been sourced from the original manufacturer to ensure quality. The metal screw is intended to be used with snowthrowers from Toro and Lawn-Boy. This screw is used to secure the bearing f...
In Stock
Order now and your part arrives by Nov 22
Genuine OEM replacement part, this item is sold individually. The 795629 Air Cleaner Gasket is attached to the part number 795259 Air Cleaner Base on one side and to the Carburetor on the other side. ...
In Stock
Order now and your part arrives by Nov 22
This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by ...
In Stock
Order now and your part arrives by Nov 22
$12.19
This is a genuine replacement part sourced from the original manufacturer for use with walk-behind lawnmowers. The special rope stop fits into the starter rope handle and is used to secure the starter...
In Stock
Order now and your part arrives by Nov 22
This is an OEM primer bulb and clip. It is attached to the engine air filter base. When the primer bulb is pushed, this fills the carburetor with fuel, making it easier to start a cold engine. This ru...
In Stock
Order now and your part arrives by Nov 22

Common Problems and Symptoms for 22242

Viewing 3 of 3
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Cannot pull starter cord out or engine will not turn over
Fixed by these parts
Fixing Fixing
How to fix it
Engine will not idle
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Seikai from MARICOPA, CA
Parts Used:
497680
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel , pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
15 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dustin from BANGOR, ME
Parts Used:
590508
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Socket set, Wrench set
Leaking gaskets
All the gaskets needed to be replaced on the Briggs 6.75 flathead I was rebuilding. I ported and polished the ports and shaved the eyebrow between the valves and the piston. The gasket set was a perfect fit. It is a monster now. It doesn't sound like a lawnmower engine anymore
4 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!