Models > 96145003500

96145003500 Husqvarna Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 96145003500

Viewing 11 of 11
Air cleaner/cylinder head Diagram and Parts List for Husqvarna Lawn Mower
Air cleaner/cylinder head
Armature/spark plug/controls Diagram and Parts List for Husqvarna Lawn Mower
Armature/spark plug/controls
Blower housing Diagram and Parts List for Husqvarna Lawn Mower
Blower housing
Carburetor Diagram and Parts List for Husqvarna Lawn Mower
Carburetor
Cylinder/crankshaft/gasket set Diagram and Parts List for Husqvarna Lawn Mower
Cylinder/crankshaft/gasket set
Engine Diagram and Parts List for Husqvarna Lawn Mower
Engine
Fuel supply/exhaust Diagram and Parts List for Husqvarna Lawn Mower
Fuel supply/exhaust
Handle Diagram and Parts List for Husqvarna Lawn Mower
Handle
Mower deck/cutting deck Diagram and Parts List for Husqvarna Lawn Mower
Mower deck/cutting deck
Rewind starter/flywheel Diagram and Parts List for Husqvarna Lawn Mower
Rewind starter/flywheel
Starter motor/flywheel Diagram and Parts List for Husqvarna Lawn Mower
Starter motor/flywheel
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Flangelock Hex Nut – Part Number: 532409149
$6.84
This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most mod...
In Stock
Order now and your part arrives by May 29
Lawn Mower Handle Knob – Part Number: 532185577
$12.06
This is an OEM part sourced directly from Husqvarna. This handle knob is used on a variety of lawn and garden equipment. Commonly used in lawn mower to secure the handle, and in snow blowers to secure...
In Stock
Order now and your part arrives by May 29
Lawn Mower Idler Pulley – Part Number: 587969201
$27.14
This idler pulley is sold independently and includes the pre-installed bearings. It is an exact OEM replacement part for the original. This part is found in walk-behind lawn mowers to supply tension t...
In Stock
Order now and your part arrives by May 29
Lawn Mower Wheel Dust Cover – Part Number: 581840401
$9.14
This is a genuine replacement part sourced directly from the manufacturer. The dust shroud is commonly found in Craftsman lawn mowers. This part is made of high-quality plastic, and is used to preve...
In Stock
Order now and your part arrives by May 29
Lock Washer – Part Number: 596238701
$6.84
This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on y...
In Stock
Order now and your part arrives by May 29
Pulley – Part Number: 587973001
$31.53
This item is sourced directly from the original equipment manufacturer. It is specially designed for use with Husqvarna riding lawn mowers. The idler pulley helps to apply tension on the belt. Over ti...
In Stock
Order now and your part arrives by May 29
Lawn Mower E-Ring – Part Number: 812000058
$6.84
This e-ring is an original part from Craftsman for lawn mowers and walk behind lawn mowers. This part tightens the pinion gear to the front axle drive. It is recommended that you wear gloves before in...
In Stock
Order now and your part arrives by May 29
Lawn Mower Drive Pawl – Part Number: 532404845
$7.52
This part has been sourced from the original manufacturer and is intended to be used with walk-behind lawnmowers from Husqvarna, Poulan, Weed Eater, and Jonsered. The metal pawl is used to secure the ...
In Stock
Order now and your part arrives by May 29
Lawn Mower Wheel – Part Number: 580365301
$54.84
This replacement wheel is a genuine manufacturer sourced item that is specially produced for Husqvarna lawn mowers. This is the rear drive wheel that is driven by the transmission assembly. It is made...
In Stock
Order now and your part arrives by May 29
Lawn Mower Selector Knob Deluxe – Part Number: 532701037
$7.52
This is a genuine Craftsman selector knob that is specifically made for use with a walk behind lawn mower. This selector knob attaches to the adjustment lever giving the user a comfortable grip when a...
In Stock
Order now and your part arrives by May 29
Belt – Part Number: 580364609
$22.60
This drive belt transfers power between rotating components to support motion and operation. Built for strength and flexibility, it helps ensure smooth power transmission and dependable performance.
In Stock
Order now and your part arrives by May 29
Lawn Mower Star Knob For Handle – Part Number: 532182398
$9.14
The black star knob handle is available as an individual replacement part. If it breaks it will need to be replaced and no tools should be needed to replace this part. It is made of plastic and connec...
In Stock
Order now and your part arrives by May 29
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Isaiah from CHAMBERSBURG, PA
Parts Used:
592358
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Blown Head Gasket
This was an OHV motor so in order to get to the head, you must remove the valve cover and remove the push rods. Remove all four head bolts in an even star pattern. Remove the old gasket and scrape all remaining gasket gunk. Put new gasket on and tighten head back on with an even star pattern. Slide push rods back in and adjust valves to . 004 of an inch and put valve cover back on and start it up!
Read less
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from BOAZ, AL
Parts Used:
592358
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
Blown Head Gasket
Remove the top cover and pull cord assembly. Remove the muffler cover. Lift off the gas tank and disconnect from the air filter box. Remove the air filter box and carb from the head cover as a single unit. Remove the head cover. You can leave the valve cover in place. Remove old gasket material. Clean surfaces. Replace gasket. Reassemble . *if the valve stems come loose from their seats or rockers, remove the valve cover and reseat. Reassembly is the opposite of disassembly. Happy mowing.
Read less
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kim from KENNER, LA
Parts Used:
796503
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Screw in new dipstick, check oil level
Very well
5 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More