Models
>
968999747
968999747 Husqvarna Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$6.51
This OEM hex head bolt is for lawn tractors. It is used on mower deck mandrels for mounting the spindles to the deck. This is a self-threading screw and will need to be replaced if it is worn or missi...
In Stock
Order now and your part arrives by Apr 6
$13.02
This is an OEM bolt and washer assembly, designed to hold the lawnmower blade to the spindle shaft. This threaded bolt has a curved rounded head and measures approximately 7/16-inches by 2-inches. If ...
In Stock
Order now and your part arrives by Apr 6
This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are ...
In Stock
Order now and your part arrives by Apr 6
$18.66
This authentic manufacturer-sourced mandrel pulley is designed for use with Craftsman lawn mowers. It serves as a direct replacement for a missing or damaged pulley originally installed on the unit, h...
In Stock
Order now and your part arrives by Apr 6
$70.05
This mandrel assembly is for lawn tractors.
Mandrel assembly attaches to the mower deck and spins the blades. The assembly may include multiple parts; refer to your parts diagram for a complete lis...
In Stock
Order now and your part arrives by Apr 6
$28.71
This is mulching blade is specially designed for use with Craftsman riding lawn mowers/tractors. Mulching blades are shaped to keep the grass under deck for longer allowing it to be cut into smaller p...
In Stock
Order now and your part arrives by Apr 6
$6.51
This high-quality item is an authentic OEM hardware that is designed for use with Craftsman riding lawn mowers and garden tractors. It is one of the locknuts that is utilized to secure the pulleys. A ...
In Stock
Order now and your part arrives by Apr 6
$6.51
This is a genuine Craftsman replacement part for use in lawn tractors. It helps to connect the deflector rod to the deflector shield. The metal push nut is a small part and will need to be replaced if...
In Stock
Order now and your part arrives by Apr 6
$6.51
It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tigh...
In Stock
Order now and your part arrives by Apr 6
This is a genuine OEM power take-off (PTO) switch for a ride-on lawn mower. This switch engages the electric clutch to spin the blades. This part includes one plastic PTO switch with a push-pull, snap...
In Stock
Order now and your part arrives by Apr 6
$8.70
This deflector rod is an original part from Craftsman for lawn tractors and mowers. This part connects to the deflector shield and allows the deflector shield to swivel down and up. You will need a so...
In Stock
Order now and your part arrives by Apr 6
$12.91
This genuine replacement mandrel stripper is sourced directly from the original manufacturer and is designed for use with riding lawn mowers and garden tractors. It functions as a mounting bracket bet...
In Stock
Order now and your part arrives by Apr 6
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Joseph from CANBY, MN
- Parts Used:
- 587820301
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Socket set
Worn out Mandrel Assemblies
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
Was this instruction helpful to you?
Thank you for voting!