Models
>
127-560-100
127-560-100 (1987) Cub Cadet Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$6.51
This is a spark plug and it is found in various lawn equipment. If your engine is not starting or running poorly, you may need to replace the spark plug. This part is a RJ9LM. Meaning, it is a resisto...
In Stock
Order now and your part arrives by Oct 8
This is a Genuine Briggs & Stratton part used on 3-5 HP horizontal Pulsa-Jet Carburetor engines (new style). This part is sold individually. Diaphragms are an essential part of an engine because they ...
No Longer Available
$17.55
Difficulty pulling the starter rope or a cord that stays extended can result from a damaged recoil pulley. This wheel guides and stores the rope while helping turn the engine during starting. Similar ...
In Stock
Order now and your part arrives by Oct 8
Genuine Manufacturer Approved replacement part used on a variety of Engines. This is a tube pick-up for 3-5HP horizontal and 5HP vertical engines with 2 and 3 quart tanks and a pulsa jet carburetor. T...
No Longer Available
$7.83
This item is a genuine OEM sourced part that is intended to be used with small engines from Briggs & Stratton and Toro. The gasket is used to seal the connection between the cylinder and the head. A h...
In Stock
Order now and your part arrives by Oct 8
$48.35
Hard starting may come from the recoil system instead of the carburetor or spark plug. If the rope pulls but the engine does not turn, the starter clutch may be worn, dirty, or jammed. The clutch turn...
In Stock
Order now and your part arrives by Oct 8
$63.68
This magneto provides the spark your engine needs to start and run properly. It’s a durable replacement for a worn coil and installs easily—just set the correct gap and reconnect the wiring for smooth operation.
In Stock
Order now and your part arrives by Oct 8
$14.53
This item is available as an individual replacement part but also includes the screws. The muffler deflector attaches to the lo-tone muffler and is made of metal. A nutdriver might be required during ...
In Stock
Order now and your part arrives by Oct 8
$6.51
This is the gasket that helps to provide an air tight seal for the breather assembly. It is a high quality item that is supplied by original equipment manufacturer for use with Briggs and Stratton and...
In Stock
Order now and your part arrives by Oct 8
$7.65
This OEM engine screw is a genuine Briggs & Stratton replacement fastener designed for secure, vibration-resistant attachment of engine components in small gasoline engines and outdoor power equipment...
In Stock
Order now and your part arrives by Oct 8
In Stock
Order now and your part arrives by Oct 8
Common Problems and Symptoms for 127-560-100
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Thomas from ALFRED, ME
- Parts Used:
- 397358
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Was this instruction helpful to you?
Thank you for voting!