Models
>
12AE468S009
12AE468S009 (2010) Cub Cadet Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...
In Stock
Order now and your part arrives by Sep 10
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
Order now and your part arrives by Sep 10
Genuine OEM replacement part, this item is sold individually. The Blade Control Cable is the cable that stops the blade when the control handle is released on Walk-Behind Mowers. This part has Z bend ...
In Stock
Order now and your part arrives by Sep 10
$6.55
This is a Genuine Manufacturer Approved replacement part used on a variety of Lawn and Garden Equipment. This screw has different applications depending on your equipment. This item is made out of Met...
In Stock
Order now and your part arrives by Sep 10
$25.48
Genuine OEM replacement part used on Push Walk-Behind Mowers. This part is made out of Plastic and it is sold individually. It is mounted to the side of the mower for the cut grass to be expelled out of it.
Special Order
$166.92
This grass bag is a genuine manufacturer sourced replacement item. It is commonly used on a variety of walk-behind lawn mowers. It is designed to collect the grass trimmings for easy disposal. It is m...
In Stock
Order now and your part arrives by Sep 10
This is a genuine manufacturer sourced replacement part designed for use with walk behind lawn mowers. It is used to secure the blade to the spindle/shaft. This part is made out of metal and it is sol...
In Stock
Order now and your part arrives by Sep 10
$6.55
This is an authentic carriage bolt is designed for use with lawn and garden equipment. It is sourced from original equipment manufacturer. This bolt has multiple uses depending on your equipment. Plea...
In Stock
Order now and your part arrives by Sep 10
$6.51
This item is a genuine OEM replacement part that is intended to be used with snowthrowers and lawnmowers from Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, and Yard-Man. The metal hex head screw is us...
In Stock
Order now and your part arrives by Sep 10
It is a genuine manufacturer-supplied item that is made for walk-behind lawn mowers. The part attaches above the blade to protect the crankshaft pulley and the drive belt from cut grass and other debr...
No Longer Available
$6.51
This is an authentic item that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. It provides an identical replacement for a missing or a faulty dowel pin that wa...
In Stock
Order now and your part arrives by Sep 10
$6.62
This handle knob is an authentic OEM replacement part. It is customarily used in Ryobi and MTD lawn mowers. This knob is used to make adjustments to the upper handle of the lawn mower. This part is ma...
In Stock
Order now and your part arrives by Sep 10
Common Problems and Symptoms for 12AE468S009
Viewing 3 of 3Will Not Start
Fixed by these parts
How to fix it
Cannot pull starter cord out or engine will not turn over
Fixed by these parts
How to fix it
Engine will not idle
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Seikai from MARICOPA, CA
- Parts Used:
- 497680
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel
... Read more
, pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darrel from SARASOTA, FL
- Parts Used:
- 596409
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
The exhaust system just fell off the motor
I ordered the parts as there were only three screws and two bolts that needed to come out and then thenew ones go back in. Everything went just as planned...….well except the two bolts that where included by Briggs and Stratton appear to be 1/8-1/4" too short and now both of the threaded holes in the engine are now stripped and the quick
... Read more
easy repair is now a bust and not repairable by me.
This has nothing to do with PartSelect.com as they just shipped the Briggs and Stratton part box.
This has nothing to do with PartSelect.com as they just shipped the Briggs and Stratton part box.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kim from KENNER, LA
- Parts Used:
- 796503
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Screw in new dipstick, check oil level
Very well
Was this instruction helpful to you?
Thank you for voting!