Models
>
55AC5GMR050
55AC5GMR050 Cub Cadet Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...
In Stock
Order now and your part arrives by Sep 3
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
Order now and your part arrives by Sep 3
$6.51
This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torqu...
In Stock
Order now and your part arrives by Sep 3
$6.51
This genuine OEM supplied part is specially designed for use with a variety of lawn and garden equipment. It is a standard hardware which may have multiple applications. Make sure to refer to the appr...
In Stock
Order now and your part arrives by Sep 3
In Stock
Order now and your part arrives by Sep 3
In Stock
Order now and your part arrives by Sep 3
$12.00
This item is an authentic OEM replacement part that is intended to be used with small engines from Briggs & Stratton. The breather tube is used to guide the direction of excess gasses and fluid that e...
In Stock
Order now and your part arrives by Sep 3
$6.55
This is a Genuine OEM replacement part used on a variety of Lawn and Garden Engines. This item is made with Composite Material and it is sold individually. Its purpose is to make an air tight seal bet...
In Stock
Order now and your part arrives by Sep 3
$6.51
This item is an authentic OEM part. It is used in various models of Toro tractors and Briggs & Stratton engines. An o-ring is used to seal and protect in between rigid connected pieces. Proper seal is...
On Order
$8.94
Genuine OEM replacement part used on a variety of Engines. This item is made with Composite Material and it is sold individually. Its purpose is to make an air tight seal so that no air/oil leakage oc...
In Stock
Order now and your part arrives by Sep 3
$54.73
Ignition coil 595304 is an original equipment manufacturer (OEM) part that fits Briggs & Stratton lawn and garden equipment engine models 31R907-0018-G1, 33R877-0002-G1, 33R877-0009-G1 and 33S877-0015...
In Stock
Order now and your part arrives by Sep 3
$13.77
This part is an OEM from Briggs & Stratton. The push rod guide is compatible with many lawn tractor engines. The metal and plastic item is fitted in the cylinder head assembly, securing the push rods....
On Order
Common Problems and Symptoms for 55AC5GMR050
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Stopped running. Turned to be a bent intake push rod and broken rocker arm
Removed head. Replaced both rocker arms, intake pus rod, push rod guide exhaust and head gaskets. Torqued head in 3 stages to 216 in/lbs. gapped intake to .004 and exhaust to .006 at TDC
Added oil and gas. Now running great
If you need to replace push rods use steel (exhaust) they are the same length
The engine ... Read more was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms
Added oil and gas. Now running great
If you need to replace push rods use steel (exhaust) they are the same length
The engine ... Read more was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Emanuel from FERRIDAY, LA
- Parts Used:
- 794683
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mow
... Read more
er with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from N FRANKLIN, CT
- Parts Used:
- 591301
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Starter Rewind broke internally-rope did not work
Removed old broken rewind starter (4 bolts); found the Model and Serial numbers; found Parts Direct and ordered new assembly; upon delivery, reinstalled with new Starter and hardware.
Was this instruction helpful to you?
Thank you for voting!