Models > 917383161

917383161 Craftsman Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 917383161

Viewing 3 of 3
Page A Diagram and Parts List for Craftsman Lawn Mower
Page A
Page B Diagram and Parts List for Craftsman Lawn Mower
Page B
Page C Diagram and Parts List for Craftsman Lawn Mower
Page C
Keep searches simple, eg. "belt" or "pump".
Nut 8Pk – Part Number: STD541431
This pack of 8 nuts is a standard part used in a variety of lawn and gardening tools. For the accurate location in your tools and installation instructions, refer to the diagram provided by the manufacturer.
No Longer Available
Washer 8Pk – Part Number: STD551025
$4.99
This is an 8 pack of flat washers and it is used for various power tools. These washers are a 1/4 inch in diameter, and made of metal. These are general use washers, and are usually positioned under a...
Special Order
Motor Oil 20oz sae 30 – Part Number: 40020
No Longer Available
Control Bar – Part Number: 532086902
No Longer Available
Tune-up kit – Part Number: 33014
Kit Contains: One 20 OZ. Bottle Engine Oil, One 2.5 Oz. Bottle Fuel Stabilizer, One Spark Plug, One Air Filter.
No Longer Available
1/4-20 Hex Lock Nut – Part Number: STD541425
No Longer Available
Screw 8Pk – Part Number: STD601005
No Longer Available
Magneto Armature – Part Number: 591420
$59.41
In Stock
Fuel stabilizer – Part Number: 95012
No Longer Available
Screw 5Pk – Part Number: STD523106
No Longer Available
Screw 8Pk – Part Number: STD512505
No Longer Available
Bracket – Part Number: 429930X004
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Joel from ROSEVILLE, MN
Parts Used:
581547901
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
My lawn mower blade wouldn’t stay in place. The old blade adapter had worn down and broken.
I took off the old blade adapter and put the new one on. It literally requires removing one bolt. Unfortunately, once I started and ran my mower for a few minutes it blew up and left a charred patch of lawn. The underside of the mower is mangled metal and unusable now. The repair, though, was super easy!
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More