Models > 917289620

917289620 ((YTH 22 V 42)(2010-05) (Sears)) Craftsman Lawn Mower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Aluminum Push Rod – Part Number: 690982
$8.27
This is a replacement push rod for your lawn tractor engine. It is made of aluminum and is the push rod used for the exhaust valve. Occasionally, the push rod in your engine can become damaged, and wi...
Special Order
Gasket-Rocker Cover – Part Number: 690971
$7.65
This part includes one manufacturer-approved rocker cover gasket for a lawn tractor. This gasket is for the cylinder head where it creates a tight seal to protect the equipment from leaks. Over time t...
In Stock
Cable Clutch Manual With Spring. – Part Number: 532435110
$37.35
Authentic replacement part used on Husqvarna riding lawn mowers/tractors. This cable consists of a metal wire cable with z-type bent end and rubberized cover/body. The clutch cable engages the deck. ...
In Stock
Spring-Torsion-Deflector – Part Number: 532197026
$9.96
In Stock
Hose-Vacuum – Part Number: 793147
$7.65
In Stock
Carburetor Overhaul Kit – Part Number: 797890
$86.92
This carburetor overhaul kit is a manufacturer-approved kit which contains replacement parts for your outdoor power equipment engine. The kit includes gaskets, o-rings, and diaphragms needed to perfor...
On Order
Repair Manual – Part Number: 273521
$37.91
In Stock
Clamp-Hose – Part Number: 691038
$3.99
In Stock
Sealant-Liquid – Part Number: 100106
$14.11
In Stock
Seal--Dipstick Tube – Part Number: 691032
$5.71
On Order
Link-Throttle (Used With Plastic Intake Manifold) – Part Number: 695238
$8.01
In Stock
Gasket-Air Cleaner – Part Number: 691001
$3.99
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
D from HUNTSVILLE, AL
Parts Used:
796232
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
Engine quit due to valve guide sliding out causing rocker arm to be immovable resulting in bent push rods.
Clean engine with a Gunk type product. Remove valve cover. Loosen bolts and remove old cylinder head. One bolt is located inside valve cover area. Remove old gasket and inspect and clean that surface. Attach new head with new gasket using existing bolts. Torque to 18'#s with a cross type pattern. Attach new rocker arms and push rods. Set valve clearance to .004 - .006. Attach valve cover with gasket. Check oil level. Start and let it warm up. Let cool remove cover then check valve clearance again. Replace cover.
Read less
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
dan from EASTPORT, ME
Parts Used:
791501
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Lost my main jets while cleaning old gas from carb.
I removed the fan shroud, the carb/manifold as an assembly,turned the carb upside down and removed the fuel bowl. I replaced only one jet. Not until this moment did I discover their were two jets in this nikki carb. I now have a second jet ordered and will install it Friday,hopefully. These jets are two different part numbers as one is a left jet and the other is a right one. Be careful when opening the fuel bowl as these jets are held in their bores by small O-rings, and nothing else. The brigg's and Stratton part numbers are 791501 for the left jet and 791502 for the right.
Read less
8 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More