Models
>
228511X8F
228511X8F (2004) Briggs and Stratton Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 228511X8F
Viewing 7 of 7
Keep searches simple, eg. "belt" or "pump".
$9.60
This is a genuine OEM sourced replacement part for Lawn and Garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. It will have different applications...
In Stock
Order now and your part arrives by Mar 22
$38.98
The drive belt wraps around the spindle pulley and is available as an individual replacement part. This is an original Snapper part designed for rear engine rider mowers. The belt will need to be repl...
In Stock
Order now and your part arrives by Mar 22
This is a nut for your lawn and garden equipment. The diameter is 5/16 inches with a thread size of 18. The nut has a washer like base, with a wide flange to ensure it will not loosen with heavy vibrations.
In Stock
Order now and your part arrives by Mar 22
$6.92
This is a genuine manufacturer-sourced component which is specially designed for use with Murray riding lawn mowers and garden tractors. It is a standard hardware which may have multiple applications....
In Stock
Order now and your part arrives by Mar 22
In Stock
Order now and your part arrives by Mar 22
Special Order
In Stock
Order now and your part arrives by Mar 22
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Thomas from Canton, OH
- Parts Used:
- 7043844YP
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
Clearances are tight getting the belt onto the drive pulley on the engine
The clearance problem can be relieved by loosening a couple engine mount bolts and the bolts that mount the friction wheel assembly to the mower frame. No need to take the bolts out just loosen them a few turns.
Was this instruction helpful to you?
Thank you for voting!