22855X6A (1996) Briggs and Stratton Lawn Mower

This is a genuine OEM sourced replacement part for Lawn and Garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. It will have different applications...

This is a genuine manufacturer sourced replacement part used on Murray lawn mowers. This is the wheel that supports and helps to move your mower around. This wheel assembly consists of a plastic rim a...

This is a hair pin clip for your lawn equipment. You may also know it as a cotter pin. It is a multi-application part, depending on your unit, as well as the make and model. To correctly install the p...

This is an authentic OEM replacement part designed for use with Murray lawn and garden equipment. This bolt is a standard hardware which has multiple uses based on your equipment. Please check diagram...

This hex nut is created for use on lawn and gardening equipment. This is a multi-application nut that depends on the unit and tool you are using. For installation instructions, check the manual provid...

This is a nut for your lawn and garden equipment. The diameter is 5/16 inches with a thread size of 18. The nut has a washer like base, with a wide flange to ensure it will not loosen with heavy vibrations.

This is a genuine manufacturer-sourced component which is specially designed for use with Murray riding lawn mowers and garden tractors. It is a standard hardware which may have multiple applications....

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicit...

Keep in mind this part is made of metal and is sold individually. The washer goes next to the extension spring. It may require a wrench during installation. Over time this part may break and will need...

This is an original Murray replacement part manufactured for use with walk-behind lawnmowers. The special washer is used as a spacer between the bottom of the blade and the blade bolt. This washer is ...

The drive pin attaches to the pinion gear and the washer. This part is an OEM from Murray for use in lawn mowers. It is made out of metal and is sold individually. It may require a set of pliers and a...

This is a genuine manufacturer-supplied part that is made for Murray riding lawn mowers. Washers are commonly utilized to provide a tight fit between connected components. Over time the material will ...