This is an OEM replacement part for use with lawn mower. The fan is attached to the blade and is used to divert the grass clippings away from the engine compartment. This fan is made of durable plasti...
This shunted brush is a carbon motor brush with a shunt wire. It is sold separately, however your lawnmower will have two of these, so you should consider replacing both at the same time. These two sh...
This is a genuine Black and Decker replacement part, it is sold individually.
This is the part of the mower that turns the motor on and off.
It is actuated by pulling on the switch lever.
It has fo...
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Elisabet
September 27, 2023
Black and Decker, electric chorded mulching lawnmower.
Hello, I have had this lawnmower a long time and was trying to cut some jasmine vine that grew on the grass that was quite thick. The lawnmower then slowed down to the point where I could not get it to start. One of my neighbors looked at it and said it wasn't the starter in the handle . I think that it is probably one of the brush/springs that touch the wires to create the connection to start the mower. I don't know if I should order just springs or just the brush or both. Do they come together?j Will soldering need to be done after they are switched out? I do not know how to do that part. Thank you.
For model number MM275
Hi Elisabet, thank you for reaching out. Based on the description that you have provided, we would suggest replacing the shunted carbon brush, part number FIX9927365, to fix the issue. It is sold individually. To replace the carbon brush, you will be required to solder the wires together. Good luck with your repair!
