Models
>
79044119511
79044119511 Kenmore Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 79044119511
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
This switch controls the large surface burner. As per manufacture the original screws will damage new switch. New screws are needed.
In Stock
Order now and your part arrives by Apr 26
$78.55
A burner that won’t heat—or one that only stays on high—can make cooking frustrating. This dual-element infinite switch helps fix that by restoring full temperature control to your cooktop. It adjusts...
In Stock
Order now and your part arrives by Apr 26
This dual radiant surface bridge element provides targeted heat to electric cooktops and ranges by activating a radiant coil beneath the glass surface. Rated at 1800/2600 watts, it ensures efficient a...
In Stock
Order now and your part arrives by Apr 26
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 79044119511
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Leon from Deer Paerk, TX
- Parts Used:
- 318293825
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
switch was not turning off had to jiggle it to go off
no problem slightly different shape than original but labels for wires matched up mounting screws aligned perfectly works great
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Oconomowoc, WI
- Parts Used:
- 318293825
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Large Burner was not heating up properly
Don't be put off when you first get the new switch. It's not an exact duplicate to the one your replacing. You will notice that the new switch has 5 electrical connectors and you'll see 6 wires on the old one. start by removing the L1 wire(s) off the old switch, you will see that it actually has 2 wires connected to the same connector.
... Read more
Now connect to the L1 position on the new switch. Continuie with taking one wire at a time off the old switch and connect to the corresponding connector on the new switch (all the connectors are coded the same, ex. L1, P, etc....) Once complete the switch and burner worked perfectly
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- larry from chatsworth, GA
- Parts Used:
- 318293825
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench set
burner got to hot
repair it
Was this instruction helpful to you?
Thank you for voting!