Models
>
1105806900
1105806900 Kenmore Iron
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 1105806900
Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
$19.63
This 10-watt clear bulb provides dependable lighting inside dryers and refrigerators, helping you see the interior clearly when the door is open. Compatible with a variety of appliance models, it inst...
In Stock
Order now and your part arrives by Aug 9
This water inlet valve is intended for use with horizontal motor dishwashers. It uses a 3/8 of an inch valve tubing and a mounting bracket.
No Longer Available
In Stock
Order now and your part arrives by Aug 9
Special Order
In Stock
Order now and your part arrives by Aug 9
Special Order
Common Problems and Symptoms for 1105806900
Viewing 3 of 3Will not fill with water
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from Atlanta, GA
- Parts Used:
- 3374621
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench set
Dishwasher running with no or little water.
Removed screws under counter holding washer in place. Pulled washer out until I could access the back. Turned water supply off (in my case faucet under the sink) Turned power off at breaker.
Disconnected water line and electrical wires noting wire location. Removed solenoid unit by undoing two screws on frame. Installed new unit, co ... Read more nnected wires and water. Turned water on to ensure no leaks and pushed washer back under counter. Turned power back on and checked machine operation. Replaced the screws under the counter to keep machine in place. This is very easy. In my area a plumber would charge $75 to do this.
Disconnected water line and electrical wires noting wire location. Removed solenoid unit by undoing two screws on frame. Installed new unit, co ... Read more nnected wires and water. Turned water on to ensure no leaks and pushed washer back under counter. Turned power back on and checked machine operation. Replaced the screws under the counter to keep machine in place. This is very easy. In my area a plumber would charge $75 to do this.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from North Las Vegas, NV
- Parts Used:
- 3374621
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Wrench set
my wife said no water coming to dishwasher!
i took off the kick plate and found the water valve. its the piece that water comes to from under the sink to connect to the dishwaser. it has a plug with 2 wires. i turned off the water supply, disconnected the wires(probably should have flipped the breaker but didnt) took out the 5/16 mounting screws, had to use a little end wrench on 1
... Read more
because it was behind the water line and a nut driver on the other. i put some thread gook on the connection and put the new one in the way it was and it works great. i am writing this because thats where i got the info to diagnose in the first place and saved me $$$!
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Natalia from Downers Grove, IL
- Parts Used:
- WP3191455
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
burned out burner
Simply plugged in hew burner. No probkems.
Was this instruction helpful to you?
Thank you for voting!