640C - Parts

This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...

This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...

Genuine Manufacturer Sourced replacement part used on Walk-Behind Push Mowers. This is the Belt which connects to the Transmission and allows mower to mower forward. This part is made out of Rubber an...

This is a Genuine OEM Sourced replacement part used on Walk-Behind Push Mowers and RotoTillers. This is the Belt which connects to the Transmission and allows mower to drive reverse. This part is made...

This foot pad is just over an inch in diameter. It is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers.

Sold Individually. This adjustable leveling leg comes with a stop nut.

This item has been OEM sourced to ensure quality. The metal bolo tine is intended to be used with tillers from Troy-Bilt. This part attaches to the tine holder on the right-hand side and is used to di...

This item is an authentic Troy-Bilt replacement part that has been sourced from the original manufacturer to be used with tillers. The metal bolo tine connects to the left tine holder and is used as a...

This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with...

The tine shaft oil seal is used in tillers and is made of metal and rubber. This part is priced as an individual item, but may require two for proper installation. If the seal becomes dried out or cra...

Sold Individually.