This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Want cleaner, better-tasting water from your fridge or ice maker? This water filter does the trick by removing unwanted particles and keeping your water fresh. It’s a genuine replacement part and supe...
This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light ...
This temperature sensor monitors the ice bin in select refrigerators to help regulate ice production. It sends temperature readings to the control board, preventing overfilling or melting. Compatible ...
This fan motor is most times used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compress...
The water distributor tube distributes water from the reservoir to the evaporator plate.
In Stock
Order now and your part arrives by May 11
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larry
February 18, 2026
Will not quit making ice. Fills bin completely up
For model number WUI75X15HZ01
Hello Larry,
Thank you for writing in. Here is some information we have found: Faulty Ice Level Sensor / Bin Thermistor
The ice maker uses a sensor (bin thermistor or ice level sensor) to detect when there’s enough ice. If this sensor fails or misreads, the unit won’t detect a full bin and keeps producing ice.
Signs:
Ice keeps filling even when the bin is full
Ice may spill out or clog the area
? Defective Control Board / Electronic Control
The control board regulates the fill and harvest cycles. If the board is malfunctioning, it may never send the signal to stop production.
Signs:
Ice maker runs nonstop
Other control issues (erratic cycles, failure to pause)
We hope this helps
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
The water filled on startup (actually over-filled, which was a clue). After that water was used to make ice, no new water came in so the recirculation pump just made whining noises in the mostly empty reservoir. Since water could come in (on start up) I reasoned it wasn't the water inlet valve, and everything else suggested the ice maker
... Read more was getting inaccurate info about how much water was in the reservoir. Turns out, the water recirculation pump has a water level sensor built in. So while the pump itself still functioned, the water level sensor inside had gone bad. Replacing the pump fixed the issue. There are videos online that show how to accomplish that, but it was pretty straight-forward. The dis-assembly was sometimes irritating because it's hard to see and maneuver around inside. It'll help if you put the machine closer to eye level. Pay close attention to videos that show the disassembly because there are a couple of tabs that are hard to find.
