KUIC18NNTS1 KitchenAid Ice Maker - Parts

This fan motor is used in frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, to cool the compressor and conden...

This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...

This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may...

Used with stand-alone ice cube makers.

If your ice maker keeps running or isn’t making ice like it should, this small sensor might be the reason. It sits in the ice bin and keeps track of the temperature, helping your fridge know when to m...

This part controls the light.

There is approximately 10'of wire. Note:2 kits are needed to replace both directions.

This is an ice cutter grid assembly for your ice maker. If your machine is not producing ice properly, the assembly may need replacing. You will find this part in the main unit of the ice maker. The t...

This part has a 1/4" yellow inlet port.

This part is located in the water pump area of the ice cube maker.

Sold individually.

This part is a drain pump for your ice maker. When you flush the reservoir on your ice maker to remove impurities, the drain pump is the part that removes the water from the reservoir. This is an auth...