Models > 1987801

1987801 Kenmore Ice Maker

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: WP488729
$7.30
Metallic screw that is less than an inch long. Does not include the plastic washer.
In Stock
Order now and your part arrives by Mar 19
Ice Maker Scoop – Part Number: W11420408
$17.80
In Stock
Order now and your part arrives by Mar 19
Ice Grid Cutter – Part Number: 2174861
Used on freestanding ice makers.
No Longer Available
Rivet – Part Number: WP596788
Sold individually.
No Longer Available
Washer Screw – Part Number: WP912618
$7.30
Sold individually.
In Stock
Order now and your part arrives by Mar 19
8-18 X .625 TR CR AB – Part Number: W11693756
$17.80
Sold individually.
In Stock
Order now and your part arrives by Mar 19
Compressor Relay/Overload Kit – Part Number: 819099
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed. The overload provides extra protection for the compressor motor.
No Longer Available
Plug – Part Number: 758597
No Longer Available
Filter Drier Tube – Part Number: W10843121
$43.21
This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.
In Stock
Order now and your part arrives by Mar 19
Compressor Start Relay – Part Number: 4318083
$66.25
Overload is sold separately. The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Special Order
Condenser Fan Motor Kit – Part Number: 978483
This motor operates the fan to help circulate the air for cooling of the compressor and the coils. It also helps to evaporate the excess water located in the drain pan.
No Longer Available
Screw – Part Number: WP965173
$7.30
Sold individually.
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Charles from Bryant, AR
Parts Used:
2174861
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Ice machine grid cutter had failed. All necessary was to pull old one and replace with new one. Hardest part was to remove the cover face plate on the front of grid cutter. The rest was a piece of cake. Now my ice machine works perfect and produces a ton of ice quickly and nicely.
I removed the two wing nut type screws and pulled grid cutter out and then disconnected both the electrical power plug and the light power plug. Then I removed the front face plate and put it on the new grid cutter after cleaning and re-inserted the new grid cutter into ice machine along with re-connecting the electrical and tighten wing screws and then turned the ice machine to on and within approx. 2-3 hours, we had ice. Very simple to do and machine works perfect now. Just like new.
Read less
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Warner Robins, GA
Parts Used:
2174861
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Icemaker would not make ice. Diagnosed problem as being the cutter which was not cutting the ice thereby causing the machine to cycle draining the water receptacle.
Removed two thumb screws holding old cutter in place, Replaced old cutter with replacement part the same way I removed the old cutter. Problem solved.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Blue Springs, MO
Parts Used:
819099
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
fans and lights worked in refrigerator but not cooling
By going on line and going to PartsSelect, the check out procedures traced the problem to the start/overload relay. Using a nut driver, I removed the back panel and using their instruction, I installed the overload relay. On the next to the last step on the instruction, the sealer in the kit was already hardened. I called the service hot line at PartsSelect and they apologized and sent me another kit to finish the repair. In two days, the new kit came and the repair was complete. The whole experience with PartsSelect was great.
Read less
9 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More