UCC15NJBII General Electric Ice Maker

Hello Bob, thank you for your question. To replace the water pump, part number FIX11764053, you need to remove the ice maker from the front and follow these instructions. 1. Unthread the screws securing the access cover to the control panel. 2. Unthread the two mounting screws securing access to the grid bracket to the liner. 3. Slide the grid out and remove the drain cap. 4. Detach the reservoir fill tube from the circulation pump cover. 5. Remove the screws to release the reservoir assembly. 6. Detach the water distribution tube from the water pump. 7. Remove the water pump wire connector and replace the water pump. 8. Attach the water distribution tube to the water pump and install the reservoir assembly. 9. Attach the reservoir fill tube to the circulation pump cover and install the grid. 10. Install the grid bracket and place the access cover on the control panel. We hope this helps!