Models
>
142
142 (20050100001-20064900000) Husqvarna Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 142
Viewing 15 of 15
Keep searches simple, eg. "belt" or "pump".
$9.79
This is a single fuel filter found in numerous types of lawn and garden equipment that have small engines. The fuel filter cleans the fuel before making its way to the carburetor, thus preventing buil...
In Stock
Order now and your part arrives by Sep 11
$6.55
This 25-inch fuel line carries fuel from the tank to the carburetor, ensuring proper engine operation. Made from durable clear plastic, it is designed to withstand regular use but may become clogged o...
In Stock
Order now and your part arrives by Sep 11
$11.28
By replacing your spark plug as part of your regular maintenance, this ensures a better performing engine, cleaner exhaust, faster starting, and a smooth-running engine. This spark plug is sourced dir...
In Stock
Order now and your part arrives by Sep 11
$6.55
This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to ...
In Stock
Order now and your part arrives by Sep 11
This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most mod...
In Stock
Order now and your part arrives by Sep 11
$6.55
It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman chainsaws. This is the special nut that helps to secure the bar. It provides an identical replacemen...
In Stock
Order now and your part arrives by Sep 11
$8.75
This authentic OEM sourced part is specially made for use with Poulan and Husqvarna chainsaws. The purpose of this spring is to retract the starter assembly, unfortunately, over time it may loose tens...
In Stock
Order now and your part arrives by Sep 11
$6.55
This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.
In Stock
Order now and your part arrives by Sep 11
$6.55
It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tigh...
In Stock
Order now and your part arrives by Sep 11
$6.55
This part includes one genuinely sourced washer for a ride-on lawn mower. Washers help to disperse the load and provides a tight seal in between components. Depending on your unit, the applications wi...
In Stock
Order now and your part arrives by Sep 11
$26.35
This is a genuine OEM sourced component which is specially made for Poulan and Husqvarna chainsaws. The are two functions of the clutch drum assembly. It encases the clutch and when the engine gets up...
In Stock
Order now and your part arrives by Sep 11
$7.65
This is a 3ft rope for a variety of power tools, most commonly chainsaws. It twists around the pulley of the recoil starter, which will allow you to pull-start the engine. This part is made of a durab...
In Stock
Order now and your part arrives by Sep 11
Common Problems and Symptoms for 142
Viewing 2 of 2Will Not Start
Fixed by these parts
How to fix it
Engine stops after a few seconds or minutes
Fixed by these parts
How to fix it
![Replacing the Fuel Line (25" Length)](https://img.youtube.com/vi/TJyUt4IFwD0/maxresdefault.jpg "Replacing the Fuel Line (25" Length)")
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
installing fuel through fuel tank wall
To start, remove the plastic carburetor grill. DO NOT remove the carburetor. The fuel line has to be sliced down to fit through the tank hole and get it in far enough up into the tank to grab with needle nose pliers.( need long needle nose pliers which I didn't have) I placed about six inches of the plastic tubing in the jaws of vice so t
... Read more
hat half of the tube was squeezed in the vice jaws. I then used a razor blade to shave off the exposed tube. I slipped the shaved end of the tube up through the tank hole far enough to grab with long tweezers and pulled it up to where I could grab it in the tank with needle nose pliers. I put light lube oil on the remaining tubing and pulled it through. It takes a steady firm pull to pull it in. Install the filter and pull the tube back down into the tank. I also used a small diameter drill bit and with my fingers slightly reamed the tube ends to ease the tube over the filter and carburetor nipples. To prime the engine, spray starting fluid into the carburetor and start. Repeat until the engine will run on fuel. It took me hours to figure this out, but will take less than an hour with this method.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from PILESGROVE, NJ
- Parts Used:
- 532123583
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
Was this instruction helpful to you?
Thank you for voting!
Did not have handle
Unscrew the four screws and put the handle on and then put the screws back in
Was this instruction helpful to you?
Thank you for voting!