325CX Husqvarna - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- JAMES from FAYETTEVILLE, AR
- Parts Used:
- 588171156
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Would not start now runs great
Remove and replace
Was this instruction helpful to you?
Thank you for voting!
Weed eater flooded constantly.
Very simple repair...took the old carburetor off and installed the new one. After replacement, the weed eater fired up after the second pull. Cover, removed 4 bolts. Carburetor, three bolts. Removed two hoses, choke handle and installed. Order gasket...never hurts to replace gaskets. One other thing, most important...use premix fuel!!! I use it in all gas powered equipment now. Cleaner and does not gum up filters and carburetor.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeremy from DILLSBURG, PA
- Parts Used:
- 537034101
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Fixed up somebody's old trimmer they threw at the curb
This trimmer was in relatively good shape. Somebody had thrown it out! They thought they had broke the rewind, but when I ended up taking it off, it sucked right back in. They also must have broke the vibration plate on the bottom. With the screws and plate I bought from here, plus a new head and service kit I got elsewhere , this thing ran like a champion again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- STEVE from COLBERT, WA
- Parts Used:
- 532405077
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Socket set
Needed a couple washers and a spring broken drive sprocket
Machined new center hub for sprocket attatched it to sprocket restacked everything back together adjusted tracks going to change oil fire it up see how it all works
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jason from Cummington, MA
- Parts Used:
- 585056901
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Chunk of wood broke the lower plastic chute.
Removed belt cover. Unbolted upper chute mount and removed metal upper chute with cables still attached. Replaced plastic lower chute, 4 bolts and reassembled machine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from ALGOMA, WI
- Parts Used:
- 503718201
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
part not same
Ordered on/off switch. My switch had only one wire terminal. Replacement had two. I ran a wire from one to a screw as a ground. Switch worked fine.
Was this instruction helpful to you?
Thank you for voting!