Models > 30RJ36

30RJ36 Hotpoint Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Bake Element – Part Number: WB44X5043
$65.15
In Stock
Order within the next 0 mins and your part ships today!
SWITCH OVEN – Part Number: WB22X5132
No Longer Available
BROIL UNIT 236V – Part Number: WB44X5045
No Longer Available
DISCONTINUED – Part Number: WB21X5212
No Longer Available
DISCONTINUED – Part Number: WB9X5018
No Longer Available
DISCONTINUED – Part Number: WB3X5226
$23.11
Special Order
DISCONTINUED – Part Number: WB3X5253
$29.56
Special Order

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 30RJ36

Viewing 2 of 2
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dennis from Los Alamos, NM
Parts Used:
WB44X5043
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
The oven's bottom bake element burned up
First I turned the circuit breaker switch off for the stove unit. I then removed the two screws that hold the element in place at the back of the oven. I then pulled the element out about 3 inches and disconnected the two wires. I attached the new element, bolting the wires into place and then screwed the element back into place on the back wall of the oven. I flipped the breaker switch back on, and turned on the oven. I was done in roughly 15 minutes. The most difficult part was having to shine a flash light into the oven to replace the part, and negotiating the hard cold kitchen floor.
Read less
19 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Kiowa, CO
Parts Used:
WB44X5043
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
The oven element burned completely into.
I first removed the two screws holding the element in place. Then I pulled the element out about 2 or 3 inches and then took out the 2 small screws holding the 2 wires in place. I then removed the old element and discarded it and installed the new one in the reverse order that I took out the old one. It was quite easy to do, only took abo ut 10 to 15 minutes total time.
Read less
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeff from Phoenix, AZ
Parts Used:
WB44X5043
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Burned out
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...)
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More