Models
>
BM80915
BM80915 Homelite Pressure Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for BM80915
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
This thermal release valve is for pressure washers.
Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal oper...
No Longer Available
$6.51
This is an OEM detergent suction kit, also referred to as a chemical injection kit, for a pressure washer. This kit is threaded into the pump assembly and is connected to the chemical siphon tube that...
On Order
Pressure washer 3000 PSI Horizontal Pump. You will need to transfer your thermal release valve and drive key or purchase new ones. Installing a pump without a pressure thermal release valve or drive k...
No Longer Available
$6.51
Genuine OEM replacement part, this item is sold individually. This is the part on the pressure washer that you connect the hose to. The hose then connects to the handle assembly and spray wand.
In Stock
Order now and your part arrives by Apr 9
$38.32
(25 ft., 3000 psi)
This water hose is for pressure washers.
Water hose carries water from the pump to the spray wand.
Wear work gloves to protect your hands when installing this part.
In Stock
Order now and your part arrives by Apr 9
$6.51
It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution...
In Stock
Order now and your part arrives by Apr 9
This is an authentic OEM sourced replacement part that is made for use with pressure washers. It is made of high-quality materials and is used to remove contaminants from the water that goes through t...
No Longer Available
$5.98
This is an original replacement part manufactured for use with pressure washers. This is a special nozzle that is used to change the spray angle. This nozzle produces a 25-¦ angle spray, and is sold individually.
In Stock
Order now and your part arrives by Apr 9
This genuine manufacturer sourced replacement part that is specially produced for use with Ryobi, Ridgid and Homelite equipment. A lock nut is a type of nut that resists loosening when properly thread...
No Longer Available
$6.75
This item is available as an individual replacement part. The nozzle attaches to the extension wand. An adjustable wrench might be necessary during the installation of this part. It is made of plastic...
In Stock
Order now and your part arrives by Apr 9
This soap nozzle is an authentic OEM replacement part supplied directly from the manufacturer. It is compatible with many models of pressure washers manufactured by Ryobi and Homelite. This nozzle is ...
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for BM80915
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Duarte from GRISWOLD, CT
- Parts Used:
- 308452002
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
Must have froze over winter (stored in garage)
Repair was easy, however had to u tube issue for proper orientation of parts as it did not come with any instructions. Wished I had two as shipping was twice as much as part. Very satisfied.
Was this instruction helpful to you?
Thank you for voting!