Models
>
THT-2120
THT-2120 Tanaka Hedge Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for THT-2120
Viewing 8 of 8
Keep searches simple, eg. "belt" or "pump".
$9.97
This is a genuine OEM replacement part, it is sold individually. By pressing the bulb, It will purge all of the air out of the carburetor. Then fuel will come up from the fuel tank through the fuel li...
In Stock
Order now and your part arrives by Apr 2
$5.40
This is a return grommet for your lawn and garden equipment. This part creates an airtight seal to prevent fuel leaking from your machine. We recommend installing both the grommet and the return fuel ...
Special Order
This is a pipe fuel assembly for a variety of lawn and garden equipment. This pipe is also known as a fuel line, and it is 160mm long by 5mm wide. This part feeds the carburetor with fuel by connectin...
No Longer Available
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation in...
No Longer Available
This primer bulb is used to draw extra fuel into the carburetor, allowing the engine to easily start. The primer bulb fits various power tools and is sold individually. When the purge bulb is pressed ...
No Longer Available
This is a clip, but you may also know it as a ring, and it is for your lawn and garden equipment. This part has a 6.3mm diameter and is made of metal. It is sold individually. The clip is most often u...
No Longer Available
This is a genuine OEM sourced element-cleaner designed for Tanaka gas powered equipment. It is used to filter out dust and other contaminants from going into the engine. Please note, this foam element...
No Longer Available
This fuel pipe is manufactured for Tanaka gas powered handheld equipment. It is a genuine OEM sourced item, not an aftermarket imitation. This fuel pipe allows the gas to flow between the tank and the...
No Longer Available
It is a genuine part that is supplied by the original equipment manufacturer for Tanaka handheld lawn and garden equipment. The purpose of this assembly is to allow air into the fuel tank so that a va...
No Longer Available
This lock nut is sourced directly from the original equipment manufacturer for use with Tanaka hedge trimmers. This is the specialty hardware that is used to secure the cutting blade, please refer to ...
No Longer Available
This item has been sourced from the original manufacturer to ensure a high level of quality. The oil seal is intended to be used with trimmers, edgers, scooters, chainsaws, pole saws, gas powered dril...
No Longer Available
$5.37
This is an authentic manufacturer-sourced replacement washer which is supplied for use with Tanaka hedge trimmers. It helps to distribute the pressure evenly and provide a tight seal between connected...
In Stock
Order now and your part arrives by Apr 2
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from SPRING HILL, FL
- Parts Used:
- 12318139130
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Was this instruction helpful to you?
Thank you for voting!