Models
>
223L
223L Husqvarna Hedge Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 223L
Viewing 15 of 15Keep searches simple, eg. "belt" or "pump".
$5.29
By replacing your spark plug as part of your regular maintenance, this ensures a better performing engine, cleaner exhaust, faster starting, and a smooth-running engine. This spark plug is sourced dir...
In Stock
$14.29
This is an air purge for various lawn and garden equipment. The air purge may also be known as the primer bulb, and it is made for small engines. This part circulates fuel into the carburetor of your ...
In Stock
$5.29
This is a hose for your lawn and garden equipment. It is just over 4 inches long, and made of a strong, and durable plastic. The hose is connected to the air purge bulb and the carburetor, and may be ...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- JAMES from FAYETTEVILLE, AR
- Parts Used:
- 503283401
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Would not start now runs great
Remove and replace
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeremy from DILLSBURG, PA
- Parts Used:
- 537034101
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Fixed up somebody's old trimmer they threw at the curb
This trimmer was in relatively good shape. Somebody had thrown it out! They thought they had broke the rewind, but when I ended up taking it off, it sucked right back in. They also must have broke the vibration plate on the bottom. With the screws and plate I bought from here, plus a new head and service kit I got elsewhere , this thing r
... Read more
an like a champion again.
Read less
Was this instruction helpful to you?
Thank you for voting!
Weed eater flooded constantly.
Very simple repair...took the old carburetor off and installed the new one. After replacement, the weed eater fired up after the second pull. Cover, removed 4 bolts. Carburetor, three bolts. Removed two hoses, choke handle and installed. Order gasket...never hurts to replace gaskets. One other thing, most important...use premix fuel!!! I
... Read more
use it in all gas powered equipment now. Cleaner and does not gum up filters and carburetor.
Read less
Was this instruction helpful to you?
Thank you for voting!