944514320 Craftsman Hedge Trimmer - Parts

This chainsaw fuel line kit carries fuel from the tank into the carburetor and from the primer bulb to the fuel system. This part is mostly used on gas trimmers and blowers. The fuel lines are made fr...

This is a fuel line for your lawn equipment. The line connects your fuel tank and carburetor. It delivers gas to the carburetor when needed. This part is made of clear, flexible rubber, and is 25 inch...

This is a tank purge line, also known as a fuel line kit, and it is used with various lawn equipment. The line connects fuel from the tank into the carburetor, and from the primer bulb back into the f...

If your fuel line has become brittle and started to crack, this is the replacement part you will need. This OEM fuel line, also known as a tank purge line, is made from a flexible translucent rubber a...

This is a genuine manufacturer-sourced item that is specially designed for use with Craftsman lawn and garden equipment. The purpose of this fitting is to connect two pieces of fuel line together, unf...

This is a 3ft rope for a variety of power tools, most commonly chainsaws. It twists around the pulley of the recoil starter, which will allow you to pull-start the engine. This part is made of a durab...

This is a genuine OEM approved replacement component which is specially designed for use with Craftsman handheld lawn and garden equipment. The purpose of this spring is to retract the starter assembl...

This is an authentic OEM sourced replacement piston ring used on gas Trimmers and blowers. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase, causing...

This is an authentic replacement foam filter commonly used on handheld lawn and garden equipment. The purpose of this air filter is to prevent dust and other particles from entering carburetor and eng...

This is a genuine manufacturer approved replacement part. It is specially produced for use with handheld gas powered lawn and garden equipment. It is designed to keep the fuel in the tank. Includes a ...

This replacement carburetor is an authentic OEM sourced replacement part. It is designed for use with gas trimmers. Carburetor mixes air and gas before the fuel mix goes to the engine. If the engine w...

This is an original replacement part manufactured for use with handheld leaf blowers. The flywheel has magnets on its side that create an electric charge as the magnets pass the ignition module. The e...

This is a genuine OEM sourced replacement tapping screw which is specially designed for use with Paramount and Poulan lawn and garden equipment. It is a standard hardware which has multiple applicatio...

This replacement screw is a high quality hardware that is designed for use with Paramount, Poulan and Weed Eater power equipment. It has multiple applications depending on your equipment, please make ...