Models
>
TR1700
TR1700 Black and Decker Hedge Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for TR1700
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
$4.99
This is a plastite screw for a variety of power tools. It is almost an inch long with a pan head. A plastite screw is needed when using harder plastics. It is more resistant to stripping and pulling out.
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniel
September 17, 2022
What would cause the blade to lockup when you turn it on? It makes noise just won't move
For model number TR1700
Hello Daniel, thank you for your question. If your engine runs, but the trimmer blades do not move when the throttle is engaged, the clutch may be broken or improperly tensioned. Or, it may be they are stuck and needs to be cleaned or oiled. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Curtis from Huntsville, AL
- Parts Used:
- 87486-00
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Broken power input terminal
I found this unit by the side of the road. One power input terminal was loose. Inside it was broken. Replacement was to remove the screws, pull out the wire, and cut the wire next to the terminal. I was able to strip the wire and crimp it in the terminal. I then soldered both terminals for a good connection.
Was this instruction helpful to you?
Thank you for voting!