Models
>
HS1022
HS1022 (Type 3) Black and Decker Hedge Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for HS1022
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$6.25
This lock screw is used as a standard part that fits a variety of gardening and lawn tools. The screw is a torx T20. It has multiple uses and applications based on the tool. For installation instructi...
On Order
$6.25
This is a plastite screw for a variety of power tools. It is almost an inch long with a pan head. A plastite screw is needed when using harder plastics. It is more resistant to stripping and pulling out.
On Order
$5.95
The metal spacer fits within the blade assembly and allows space between parts. The spacer is sold as an individual replacement part and may require a screwdriver and a wrench to replace. Please note ...
Special Order
$6.25
This is a genuine DeWalt replacement part that has been sourced from the original manufacturer to be used with electric trimmers. The copper contact is used to link the switch assembly to the extensio...
In Stock
Order now and your part arrives by Mar 26
$5.15
This is a genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT and Black and Decker hedge trimmers. It is a special hardware that helps to secure compone...
Special Order
$6.25
This is an authentic OEM component from DeWalt. The threaded metal screw is used on a variety of power tools, and is sold individually. A Phillips screwdriver is required for the proper installation.
In Stock
Order now and your part arrives by Mar 26
$6.25
This genuine manufacturer-sourced replacement washer which is specially designed for use with Black and Decker hedge trimmers. Its purpose is to help distribute the pressure evenly between connected p...
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
In Stock
Order now and your part arrives by Mar 26
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Curtis from Huntsville, AL
- Parts Used:
- 87486-00
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Broken power input terminal
I found this unit by the side of the road. One power input terminal was loose. Inside it was broken. Replacement was to remove the screws, pull out the wire, and cut the wire next to the terminal. I was able to strip the wire and crimp it in the terminal. I then soldered both terminals for a good connection.
Was this instruction helpful to you?
Thank you for voting!