Models
>
HS1010
HS1010 (Type 1) Black and Decker Hedge Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for HS1010
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$4.99
This is a plastite screw for a variety of power tools. It is almost an inch long with a pan head. A plastite screw is needed when using harder plastics. It is more resistant to stripping and pulling out.
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Curtis from Huntsville, AL
- Parts Used:
- 87486-00
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Broken power input terminal
I found this unit by the side of the road. One power input terminal was loose. Inside it was broken. Replacement was to remove the screws, pull out the wire, and cut the wire next to the terminal. I was able to strip the wire and crimp it in the terminal. I then soldered both terminals for a good connection.
Was this instruction helpful to you?
Thank you for voting!