Models > PT-70T-KFA

PT-70T-KFA Pro Temp Heater

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for PT-70T-KFA

Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
This Fuel Cap is an OEM approved replacement part. This part is compatible with many forced air kerosene heaters made before 2014, for full compatibility, please see "Model Cross Reference List" below...
No Longer Available
$18.69
This part is sourced directly from Pro Temp and is an OEM approved replacement part for certain Kerosene/Diesel Forced Air Heaters manufactured by Pro Temp, Heat Hog, Heat Stream, and Master. For full...
In Stock
Order within the next 6 hrs and your part ships today!
Photocell Assembly
In Stock
Order within the next 6 hrs and your part ships today!
This is a genuine replacement part sourced directly from Pro Temp. It is compatible with multiple models of Heaters manufactured by Pro Temp, Heat Hog, Heat Stream, and Master. To ensure your Heater i...
In Stock
Order within the next 6 hrs and your part ships today!
In Stock
Order within the next 6 hrs and your part ships today!
In Stock
Order within the next 6 hrs and your part ships today!
$6.23
Fuel Line
In Stock
Order within the next 6 hrs and your part ships today!
In Stock
Order within the next 6 hrs and your part ships today!
No Longer Available
In Stock
Order within the next 6 hrs and your part ships today!
$4.99
In Stock
Order within the next 6 hrs and your part ships today!
No Longer Available

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
MICHAEL
November 17, 2022
About 2 yrs old flame flickerd for a little while then cut off
For model number PT-70T-KFA
Fix.com logo
Hello Michael, thank you for the question. According to our research on the model, we would recommend checking the fuel line and the Fuel Filter, part number FIX10468915, to make sure the gas is flowing properly. If that is not the case, we would recommend checking the ignitor, part number FIX12051602, and the Main PCB Assembly, part number FIX10468970. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Rich
January 30, 2023
What parts would cause my heater to keep shutting off ? I have cleaned the photo cell, filters, spark plug, and jets. I regapped the plug and adjusted pressure.
For model number PT-70T-KFA
Fix.com logo
Hello Rich, thank you for contacting us. The issue is probably related to a faulty limit control thermostat, part number FIX10468949. The thermostat acts as a sensor that protects the unit from overheating by shutting off the heater. Please reach out to customer service if you need help placing an order. Glad to be of help!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
David
January 31, 2023
Fires up but runs for 5 seconds and goes out.
For model number PT-70T-KFA
Fix.com logo
Hi David, Thank you for your question. According to your owner's manual, if your heater runs for a few minutes and shuts off, the pump pressure may not be correct, you may have a dirty input, output or lint filter, a dirty fuel filter, nozzle or photocell, a defective photocell or a photocell that is not not installed correctly, an improper electrical connection between the circuit board and the photocell or a defective fuel valve. You will need to inspect these parts to see which one is causing the issue. We hope this helps with the repair!

Was this helpful?
Thank you for voting!
Related Parts:
DOROTHEA
December 3, 2022
How do you test the ignitor?
For model number PT-70T-KFA
Fix.com logo
Hello Dorothea, thank you for your question. If your heater does not light properly, but the gas is flowing, it indicates that the ignitor is defective and needs to be replaced. The part number for the compatible ignitor is FIX12051602. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
De
January 6, 2022
This heater starts briefly, then stops and I have a blinking white light. Help !
For model number PT-70T-KFA
Fix.com logo
Hello De, Thank you for the question. This is normally an indication the Filters may need to be replaced. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2