Models
>
9093N
9093N Nutone Heater
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 9093N
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
In Stock
Order within the next 5 mins and your part ships today!
In Stock
Order within the next 5 mins and your part ships today!
Special Order
In Stock
Order within the next 5 mins and your part ships today!
In Stock
Order within the next 5 mins and your part ships today!
Special Order
In Stock
Order within the next 5 mins and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen
November 4, 2021
Do you have directions on how to change thermal protector
For model number 9093N
Hello Stephen, Thank you for the question. Here is a repair story from a previous customer that may help. "Simple repair. Loosen two screws and remove the round cover.
Disconnect electrical plug in fixture.
Loosen two screws and remove fixture from housing.
The thermal protector is right on top of the heater coil housing.
Remove the two flat wire connectors from the unit, remove two small phillips screws and remove defective thermal protector. Reverse procedure and reassemble. Make sure all switches are shut off before disconnecting plug in unit to prevent an arc when disconnecting." Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Russ
February 2, 2022
I would simply like to just replace the unit with the same unit but I don’t think it is available. Would I have to have different wiring for the newest 9093wh unit? I don’t mind buying two new units but seems I would have to change the walk switch too. Old switch is 3 vs new setup has 4 switches. Don’t want to rewire etc.
For model number 9093N
Hello Russ, Thank you for contacting Fix.com. As we are just an online parts provider, we suggest contacting Nutone for more information on replacing the full unit. We hope this helps!
Was this helpful?
Thank you for voting!
Stephen
November 4, 2021
Only has heat for about a minute the element turns red and unit shuts off.
For model number 9093N
Hello Stephen, Thank you for the question. We suggest testing the Thermal Protector with a Multimeter to check for continuity. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
