Models
>
3107T
3107T DeLonghi Heater
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$6.51
This part comes directly from the manufacturer. This Castor is used on multiple models of Delonghi heaters. The Castor is made of a hard dense plastic with free spinning wheels. The Castor can pick up...
In Stock
Order now and your part arrives by Apr 2
$21.82
This authentic replacement rocker switch is supplied directly from original manufacturer. It is specially made for use with DeLonghi heaters. It controls the on/off functions of a unit. Switches are c...
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from MACON, GA
- Parts Used:
- 511741
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Rocker Switch wore out after 20 + years.
One phillips head screws, remove. Take cover off and flip over. Pull of six electrical leads from switch posts with needle nose pliers. Remove switch by pinching in both side release plastic hinges. May be tricky, may need needle nose pliers here. Replace switch from manifold front side. Install switch dots down facing wheels. Reattached
... Read more
leads, fasten back manifold with screw. Your ready.
Read less
Was this instruction helpful to you?
Thank you for voting!