Models
>
HR1830F
HR1830F Makita Hammer Drill
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for HR1830F
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$32.12
This is a power cord, and it is used with several power tools. It is made of a thick rubber that is tough, and insulated for a long life. It has two 18 gauge wires, and is 8 feet long. When removing y...
In Stock
Order now and your part arrives by Jul 23
$16.59
This set comes with two carbon brushes with wire leads and brush strings attached. If your motor is not running efficiently or is operating intermittently, this is a common sign of worn brushes. Due t...
In Stock
Order now and your part arrives by Jul 23
$6.51
This is a self-tapping screw, and it is found on multiple power tools and lawn equipment. This screw is different because it can tap its own hole into tough materials, such as metals and hard plastics...
In Stock
Order now and your part arrives by Jul 23
$6.51
This steel ball is an authentic OEM component which is specially designed for use with Makita rotary hammers. The ball is fitted within the tool holder, providing the ability to secure a drill bit. It...
In Stock
Order now and your part arrives by Jul 23
$6.51
This cord protector is an OEM part designed for a variety of Makita power tools. It is attached where the power cord meets the tool. This part protects the cord from damage due to pulling, bending, or...
In Stock
Order now and your part arrives by Jul 23
$6.51
This part is available individually. The labyrinth rubber ring fits between the ball bearing and the baffle plate. It is made of rubber and may require a screwdriver during the replacement process. Th...
In Stock
Order now and your part arrives by Jul 23
$6.51
This part is priced individually. The rubber cap fits on the nose of the device next to the ring spring and the chuck cover. A screwdriver may be needed to replace this part if it becomes broken. This...
In Stock
Order now and your part arrives by Jul 23
In Stock
Order now and your part arrives by Jul 23
$6.51
It is an authentic Makita item that is designed for use with rotary hammers. A guide washer is a special part which helps to provide a tight fit between connected components. This part provides an ide...
In Stock
Order now and your part arrives by Jul 23
This is a genuine manufacturer-sourced hardware. It is specially designed for use with Makita rotary hammers. This is the spring that is secured under the chuck cover. The purpose of a spring is to ap...
In Stock
Order now and your part arrives by Jul 23
In Stock
Order now and your part arrives by Jul 23
$6.51
This is an authentic manufacturer-sourced replacement ring which is specially designed for use with Makita rotary hammers. It helps to provide a tight seal between connected parts, please make sure to...
In Stock
Order now and your part arrives by Jul 23
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Bruce from HILLSBORO, OR
- Parts Used:
- 664064-4
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
Old power cord frayed at the grommet entering the drill casing
Did not do repair as replacement part did not match description on partselect website. The grommet is not part of the replacement that was sent. Order #22962198
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
Was this instruction helpful to you?
Thank you for voting!