Models > HP2010N

HP2010N Makita Hammer Drill

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for HP2010N

Viewing 1 of 1
Page A Diagram and Parts List for Makita Hammer Drill
Page A
Keep searches simple, eg. "belt" or "pump".
Power Cord – Part Number: 664064-4
$35.26
This is a power cord, and it is used with several power tools. It is made of a thick rubber that is tough, and insulated for a long life. It has two 18 gauge wires, and is 8 feet long. When removing y...
In Stock
Order now and your part arrives by May 29
Cord Guard – Part Number: 682502-4
$6.51
This is a cord guard, also known as a strain reliever, for your power tools. Power tool cords go through a lot of stress during usage, and this part is designed to remove some of that stress from the ...
In Stock
Order now and your part arrives by May 29
Retaining Ring – Part Number: 961052-5
$6.51
Genuine Makita replacement part, this item is sold individually. This Retaining Ring is used in a number of Makita Tools as shown below. Retaining rings are used in various parts of tools. They are us...
In Stock
Order now and your part arrives by May 29
Rubber Pin – Part Number: 263002-9
$6.51
This manufacturer sourced replacement pin is made out rubber and it is sold individually. It acts as a cushion/spacer in a variety of Makita power tools. This is a standard piece of hardware and it ha...
In Stock
Order now and your part arrives by May 29
Ball Bearing – Part Number: 210025-8
$16.28
This is a Ball Bearing that is sealed on both sides. This is a genuine Makita replacement part that is sold individually. • Ball bearings minimize friction between 2 parts in your tool that would...
In Stock
Order now and your part arrives by May 29
Carbon Brush Set – Part Number: CB107
$19.66
In Stock
Order now and your part arrives by May 29
Pan Head Screw M4x18 – Part Number: 911133-5
$6.51
Genuine Makita replacement part. This pan-head phillips screw includes a washer. It is sold individually.
In Stock
Order now and your part arrives by May 29
Pan Head Screw M4x22 – Part Number: 911143-2
$6.51
Genuine Makita replacement part. This pan-head phillips screw includes a washer. It is sold individually.
In Stock
Order now and your part arrives by May 29
Chuck Key S13 – Part Number: 763432-9
$8.11
This high quality replacement chuck key that is sourced directly from original equipment manufacturer for use with Makita drills. The purpose of a chuck key is to tighten and loosen the jaws of the dr...
In Stock
Order now and your part arrives by May 29
Key Holder – Part Number: 410102-8
$6.51
It is a genuine OEM sourced key holder that is specially designed for use with Makita drills. The purpose of this item is to secure the chuck key for easy access. It is made from durable flexible plas...
In Stock
Order now and your part arrives by May 29
Flat Screw M6x22 – Part Number: 251425-3
$6.51
This item is available as an individual replacement part. The metal flat screw attaches to the keyless drill chuck. If this part becomes broken or stripped it will need to be replaced and will require...
In Stock
Order now and your part arrives by May 29
Flat Washer 8 – Part Number: 941202-8
$6.51
It is an authentic item which is supplied by the original equipment manufacturer for use with Makita power tools. The purpose of this flat washer is to provide a tight seal between connected parts, pl...
On Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Replacing the Power Cord

Replacing the Power Cord

Replacing the Cord Guard

Replacing the Cord Guard

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Bruce from HILLSBORO, OR
Parts Used:
664064-4
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
Old power cord frayed at the grommet entering the drill casing
Did not do repair as replacement part did not match description on partselect website. The grommet is not part of the replacement that was sent. Order #22962198
Email sent (11/16/2023) to partselect.com has gone unanswered
Thanks?
4 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More