5053 (Type 100) Black and Decker Hammer Drill

Includes 1 Carbon Brush with wire lead attached. Genuine DeWalt replacement part. • Worn brushes are often the cause behind a poorly running motor. • Replacing brushes can fix an intermittent...

Genuine Dewalt replacement part, this item is sold individually. The purpose of this Cord Clamp is to hold the cord in place inside the tool to keep it from pulling out. It is installed just inside of...

This is a genuine DeWalt replacement part that has been sourced from the original manufacturer to be used with rotary hammers. The depth stop connects to the forward handle assembly and is used to lim...

This is a genuine part which is supplied directly by the original equipment manufacturer and is used with Dewalt and Black and Decker rotary hammer drills. When plugged in, the power cord transfers po...

This is a genuine manufacturer-approved component which is specially made for use with DeWALT and Black and Decker hammer drills. It is the part of the tool handling on/off operations, unfortunately, ...

• Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces frict...