Models > 0562-1-580676351

0562-1-580676351 Craftsman Generator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Fuel Valve With Bushing – Part Number: 192980GS
$26.70
This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the f...
In Stock
Order now and your part arrives by Mar 19
Assembly Recoil 220/191-servic – Part Number: 095268ASRV
$57.89
This is an authentic Generac replacement part that has been sourced from the original manufacturer to be used with generator engines. The recoil starter is a complete part assembly that includes the h...
In Stock
Order now and your part arrives by Mar 19
Fuel Gauge Cap – Part Number: B4363GS
$56.96
This is an authentic OEM sourced part which is designed for Briggs and Stratton and Snapper generators. It is an important part that keeps the fuel in the tank and the gauge shows a user the level of ...
On Order
Arm Rocker Gh191/220 – Part Number: G077160
$16.40
This is an original replacement part sourced directly from the manufacturer. The rocker arm is found in Generac generators. This part is made of metal, and is attached to the push rod guide plate in...
In Stock
Order now and your part arrives by Mar 19
Cover Air Cleaner No Printing – Part Number: 078608B
$65.52
This is a genuine Generac replacement part that has been sourced from the original manufacturer to be used with portable generators. The durable plastic cover fits over the air cleaner assembly. This ...
Special Order
Screw – Part Number: 691061
$6.25
This is an authentic OEM component from Briggs & Stratton. The magneto armature screw is compatible with many lawn and garden engines. The hardened metal screw helps to mount the magneto armature. A w...
In Stock
Order now and your part arrives by Mar 19
Capscrew, 5/16-18 – Part Number: 703408
$6.57
Capscrew 5/16-18
In Stock
Order now and your part arrives by Mar 19
BELT,TRACTION DRIVE – Part Number: 7072657YP
$72.65
Belt traction drive
In Stock
Order now and your part arrives by Mar 19
Assembly, Holder, Brush – Part Number: 66386GS
$31.80
This is a brush holder assembly for your generator. Brushes conduct electric currents to provide power in the motor of your unit. The brush assembly is mounted into a bearing carrier, and is wired to ...
On Order
Intake Valve – Part Number: 0D24890ESV
$62.30
In Stock
Order now and your part arrives by Mar 19
Grommet,tank – Part Number: 83465GS
$6.25
This is an authentic OEM part from Briggs and Stratton and Snapper for use with Generators. The fuel tank mounting grommet forms a cushion between the fuel tank and the fuel tank mounting bolts. The m...
In Stock
Order now and your part arrives by Mar 19
Power Regulator Assembly – Part Number: 84132GS
$52.05
This is a genuine OEM supplied part that is specially designed for Briggs and Stratton portable generators. The item provides an identical replacement for a faulty or a missing power regulator assembl...
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 0562-1-580676351

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from PICAYUNE, MS
Parts Used:
192980GS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from RADFORD, VA
Parts Used:
192980GS
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank