Models > 9162-2-580327077

9162-2-580327077 Craftsman Generator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
BELT 73.75 AA – Part Number: 7043844YP
$38.98
The drive belt wraps around the spindle pulley and is available as an individual replacement part. This is an original Snapper part designed for rear engine rider mowers. The belt will need to be repl...
In Stock
Order now and your part arrives by Mar 23
Discharge Chute Kit – Part Number: 7600147YP
$140.27
This is an authentic replacement part, sourced from the original manufacturer for use with riding lawnmowers from Snapper and Murray. The durable plastic discharge chute connects to the side of the mo...
In Stock
Order now and your part arrives by Mar 23
Breaker, Circuit, 20a – Part Number: 209872GS
$15.10
This part is an original part from Briggs & Stratton and Snapper for use in generators and welders. The circuit breaker goes inside the control box and helps to control electricity flow. A screwdriver...
Special Order
Vibe Mount, With Washer – Part Number: 191413GS
$9.55
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton generators and pressure washers. The purpose of this component is to reduce the...
In Stock
Order now and your part arrives by Mar 23
Circuit Breaker – Part Number: 75207DGS
$20.63
This is an authentic OEM sourced part which is specially made for DeWALT planers. It functions as a safety device. When the circuit becomes overloaded, this circuit breaker switch interrupts the trans...
Special Order
Rectifier, Battery Charge – Part Number: 65795GS
The battery charge rectifier goes inside the control box. It is an OEM from Briggs & Stratton for use in generators. This part is sold individually and is made of metal. A wrench and a screwdriver may...
No Longer Available
PLUG, PLSTC, 1 SQ X 16GA TUBE – Part Number: 46476GS
$2.99
Special Order
ASM BRUSH – Part Number: A24044AGS
$4.69
This is an OEM part sourced directly from the manufacturer. The brush is designed for use in generators from Briggs & Stratton. This part is a complete carbon brush assembly, which is used to supply...
Special Order
Nut, Locking Hex M8 - 1.25 – Part Number: 52858GS
$6.25
Special Order
Hhcs, M8 - 1.25 X 45 – Part Number: 39287GS
$6.25
Special Order
Rear Bearing Carrier – Part Number: 49410AGS
$145.82
Special Order
Lockwasher, 5/16 - M8 – Part Number: 22129GS
$6.25
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Thomas from Canton, OH
Parts Used:
7043844YP
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Clearances are tight getting the belt onto the drive pulley on the engine
The clearance problem can be relieved by loosening a couple engine mount bolts and the bolts that mount the friction wheel assembly to the mower frame. No need to take the bolts out just loosen them a few turns.
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More