Models > 1020-0-580327181

1020-0-580327181 Craftsman Generator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Switch Oil Pressure 8psi 1pole – Part Number: G099236
$50.36
In Stock
Order now and your part arrives by Mar 19
Fuel Valve With Bushing – Part Number: 192980GS
$26.70
This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the f...
In Stock
Order now and your part arrives by Mar 19
Pre-cleaner,airfltr – Part Number: G081646
$10.88
This is an original Generac replacement part manufactured for use with portable generators. The foam pre-filter traps dirt along with the main air filter to prevent contamination inside the engine. Th...
In Stock
Order now and your part arrives by Mar 19
Plug-spark – Part Number: 491055S
$6.25
In Stock
Order now and your part arrives by Mar 19
Pushrod 174.9 Length Gn360/410 – Part Number: 0D9853B
$13.30
This is an OEM replacement part sourced from the Generac manufacturer. The metal push rod 174.9 is designed for use with portable generators. This item is secured into the assembly, cylinder head seat...
Special Order
Spindle, Rider – Part Number: 7044785YP
$55.27
It is a genuine manufacturer-supplied part that is made for Murray and Snapper lawn mowers. This is the special spindle that the blade is attached to. It is a high-quality replacement for a damaged or...
In Stock
Order now and your part arrives by Mar 19
Rod Governor Cntrl – Part Number: G072735
$11.53
In Stock
Order now and your part arrives by Mar 19
Breaker, Circuit, 20a – Part Number: 209872GS
$15.10
This part is an original part from Briggs & Stratton and Snapper for use in generators and welders. The circuit breaker goes inside the control box and helps to control electricity flow. A screwdriver...
In Stock
Order now and your part arrives by Mar 19
Assembly, Holder, Brush – Part Number: 66386GS
$31.80
This is a brush holder assembly for your generator. Brushes conduct electric currents to provide power in the motor of your unit. The brush assembly is mounted into a bearing carrier, and is wired to ...
On Order
Vibe Mount, With Washer – Part Number: 191413GS
$9.55
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton generators and pressure washers. The purpose of this component is to reduce the...
In Stock
Order now and your part arrives by Mar 19
Grommet,tank – Part Number: 83465GS
$6.25
This is an authentic OEM part from Briggs and Stratton and Snapper for use with Generators. The fuel tank mounting grommet forms a cushion between the fuel tank and the fuel tank mounting bolts. The m...
In Stock
Order now and your part arrives by Mar 19
Bolt 1/4-20 x 3/4" G – Part Number: 5025010X6SM
$6.25
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 1020-0-580327181

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from PICAYUNE, MS
Parts Used:
192980GS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from RADFORD, VA
Parts Used:
192980GS
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank