Models > 030299-1

030299-1 Briggs and Stratton Generator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 030299-1

Viewing 4 of 4
Alternator Diagram and Parts List for Briggs and Stratton Generator
Alternator
Control_Panel Diagram and Parts List for Briggs and Stratton Generator
Control_Panel
Main_Unit Diagram and Parts List for Briggs and Stratton Generator
Main_Unit
Wheel_Kit Diagram and Parts List for Briggs and Stratton Generator
Wheel_Kit
Keep searches simple, eg. "belt" or "pump".
Fuel Valve With Bushing – Part Number: 192980GS
$26.70
This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the f...
In Stock
Order now and your part arrives by Mar 19
Line-fuel – Part Number: 791745
$16.16
An authentic OEM replacement fuel line that is specially produced for use with gas powered endings commonly installed on generators and other equipment. The fuel line is used to deliver the fuel from ...
On Order
Solenoid – Part Number: 691656
$35.02
This replacement solenoid-starter is an authentic OEM component. It is specially designed for Briggs and Stratton engines commonly installed on generators and some other lawn and garden equipment. The...
On Order
Breaker, Circuit, 20a – Part Number: 209872GS
$15.10
This part is an original part from Briggs & Stratton and Snapper for use in generators and welders. The circuit breaker goes inside the control box and helps to control electricity flow. A screwdriver...
In Stock
Order now and your part arrives by Mar 19
Wheel – Part Number: 209322GS
This wheel is an authentic replacement part sourced directly from Briggs and Stratton. It is customarily used for portable generators. The purpose of this wheel is to reduce the amount of effort neede...
No Longer Available
Assembly, Holder, Brush – Part Number: 66386GS
$31.80
This is a brush holder assembly for your generator. Brushes conduct electric currents to provide power in the motor of your unit. The brush assembly is mounted into a bearing carrier, and is wired to ...
On Order
E-ring – Part Number: 703977
$6.57
Keep in mind that this high-quality part is made of metal and is sold individually. A set of pliers might be helpful during the installation of this part. The e-ring fits onto the wheel and will need ...
In Stock
Order now and your part arrives by Mar 19
Kit,vibration Mount, 45'. – Part Number: 194150GS
It is an authentic item that is supplied by original equipment manufacturer, it is specially produced for use on Briggs and Stratton and Snapper generators. This kit is used to secure the engine to th...
No Longer Available
Switch, Set Exercise – Part Number: 87799GS
$8.56
The set exercise switch attaches to the hour meter. This is a genuine Briggs & Stratton part sourced directly from the manufacturer for use in generators. This part is available as an individual repla...
In Stock
Order now and your part arrives by Mar 19
Battery – Part Number: 193043GS
$150.45
This is a genuine manufacturer-sourced replacement part which is designed for use with Snapper and Briggs and Stratton portable generators. Over time batteries will become weaker and eventually will n...
Special Order
Cover, Rbc Plastic With Cap – Part Number: 195422GS
$20.07
In Stock
Order now and your part arrives by Mar 19
Assembly, Support – Part Number: 198629GS
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 030299-1

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from PICAYUNE, MS
Parts Used:
192980GS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bruce from CARNATION, WA
Parts Used:
691656
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Wouldn’t start.
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
14 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from RADFORD, VA
Parts Used:
192980GS
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank