Models > 030218-0

030218-0 Briggs and Stratton Generator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 030218-0

Viewing 3 of 3
Page A Diagram and Parts List for Briggs and Stratton Generator
Page A
Page B Diagram and Parts List for Briggs and Stratton Generator
Page B
Page C Diagram and Parts List for Briggs and Stratton Generator
Page C
Keep searches simple, eg. "belt" or "pump".
Fuel Valve With Bushing – Part Number: 192980GS
$26.70
This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the f...
In Stock
Order now and your part arrives by Mar 19
Fuel Gauge Cap – Part Number: B4363GS
$56.96
This is an authentic OEM sourced part which is designed for Briggs and Stratton and Snapper generators. It is an important part that keeps the fuel in the tank and the gauge shows a user the level of ...
On Order
Gasket-exhaust – Part Number: 692237
$6.88
The exhaust gasket attaches to the exhaust manifold and helps to form a seal. It is an authentic OEM sourced part which is specially designed for use with Briggs & Stratton generators and engines, plu...
In Stock
Order now and your part arrives by Mar 19
Brush Holder Assembly – Part Number: 91825GS
This is a genuine OEM sourced replacement part designed for use with generators. This assembly includes a plastic brush holder, two (2) carbon brushes with a lead wires and springs attached. Carbon b...
No Longer Available
Kit,vibration Mount, 45'. – Part Number: 194150GS
It is an authentic item that is supplied by original equipment manufacturer, it is specially produced for use on Briggs and Stratton and Snapper generators. This kit is used to secure the engine to th...
No Longer Available
Cover, Rbc Plastic With Cap – Part Number: 195422GS
$20.07
In Stock
Order now and your part arrives by Mar 19
Kit, Fuel Tank Hardware – Part Number: 194398GS
$16.02
In Stock
Order now and your part arrives by Mar 19
Screw, M5 - .8 X 10 Taptite – Part Number: 74908GS
$6.25
This is an original Briggs & Stratton replacement part. The screw is designed by the manufacturer for use in generators. This part is made of metal, and is generally used in securing the bearing cov...
In Stock
Order now and your part arrives by Mar 19
Nut, M8 Flange Serrated – Part Number: 67989GS
$6.25
This replacement flange nut is an authentic manufacturer-sourced component which is specially designed for use with Briggs and Stratton equipment. It is the hardware which has multiple applications de...
In Stock
Order now and your part arrives by Mar 19
Screen, Spark Arrest – Part Number: 83083GS
$13.80
This is an authentic Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with generator engines. The spark arrester screen connects to the muffler and is...
In Stock
Order now and your part arrives by Mar 19
Kit, Hose Formed – Part Number: 195207GS
No Longer Available
Bearing – Part Number: 65791GS
$47.27
This is an authentic Briggs & Stratton replacement part. The bearing is commonly found in generators. This part is made of metal, and is used to allow the rotor assembly to spin freely within the st...
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 030218-0

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from PICAYUNE, MS
Parts Used:
192980GS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from RADFORD, VA
Parts Used:
192980GS
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank