Models > 09412-0

09412-0 Briggs and Stratton Generator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Fuel Valve With Bushing – Part Number: 192980GS
$26.70
This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the f...
In Stock
Order now and your part arrives by Mar 19
Lawn Mower Washer – Part Number: 703332
$6.25
In Stock
Order now and your part arrives by Mar 19
Mount, Vibration – Part Number: 87841GS
$6.25
In Stock
Order now and your part arrives by Mar 19
Circuit Breaker – Part Number: 75207DGS
$20.63
This is an authentic OEM sourced part which is specially made for DeWALT planers. It functions as a safety device. When the circuit becomes overloaded, this circuit breaker switch interrupts the trans...
Special Order
Seal D 28 X 41.47 Viton – Part Number: 0E3811
No Longer Available
Rectifier, Battery Charge – Part Number: 65795GS
The battery charge rectifier goes inside the control box. It is an OEM from Briggs & Stratton for use in generators. This part is sold individually and is made of metal. A wrench and a screwdriver may...
No Longer Available
Cap-fuel Tank – Part Number: 846987
$33.20
This is a genuine OEM sourced component that is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is designed to keep the fuel in the tank...
In Stock
Order now and your part arrives by Mar 19
Nut, Locking Hex M8 - 1.25 – Part Number: 52858GS
$6.25
Special Order
KING PIN, RH – Part Number: 7040976YP
$91.34
Special Order
Hose Clamp – Part Number: 48031GGS
$6.25
Special Order
Key, Woodruff 4 X 19 Diameter – Part Number: 082774
No Longer Available
(s) decal model / id – Part Number: 7026850YP
$16.00
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 09412-0

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from PICAYUNE, MS
Parts Used:
192980GS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alan from RADFORD, VA
Parts Used:
192980GS
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank