Models > ZEB1227SL1SS

ZEB1227SL1SS General Electric

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for ZEB1227SL1SS

Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
The door interlock switch bracket houses and supports the door switches.
In Stock
Order within the next 11 hrs and your part ships today!
The turntable tray rotates in the center of the microwave to help ensure the food cooks evenly.
In Stock
Order within the next 11 hrs and your part ships today!
In Stock
Order within the next 11 hrs and your part ships today!
In Stock
Order within the next 11 hrs and your part ships today!
In Stock
Order within the next 11 hrs and your part ships today!
In Stock
Order within the next 11 hrs and your part ships today!
$13.28
Sold individually.
Special Order
In Stock
Order within the next 11 hrs and your part ships today!
$8.06
On Order
$43.23
Special Order
$102.09
In Stock
Order within the next 11 hrs and your part ships today!
In Stock
Order within the next 11 hrs and your part ships today!

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for ZEB1227SL1SS

Viewing 1 of 1
Door stuck closed
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Henry from NORWALK, CT
Parts Used:
WB10X27080, WB14X10049
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Microwave door was hard to open
1. Take out the case by unscrew 8 screws on the back and side of the case
2. Take out the control panel by unscrew 1 screw on the top and slide up
3. Take out the latch by unscrew 2 screws, and slide out 3 electric switches that clipped on the latch
4. Clip the switches onto the new latch
5. Slide in lever switch into latch
6. Put back the latch
7. Put back the control panel
8. Put back the case
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jay from WESLEY CHAPEL, FL
Parts Used:
WB14X10049
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Door locks. Not opening.
Slide a Butter knife at left side by open push knob door will open. Then open all screws from top cover push cover top side front way then door locks Bracket have 3 microswitch pulls out switches mark them top medium and bottom. Remove 3 screws holding brackets will come out. On bottom see a Cam has 1/4” holes can holding Saft broken then install new door lock bracket install microswitch put 3screw and slide Cam on saft . I put a small screw on saft to hold cam on place. There was no screw . That’s why cam saft was broke. Put top cover tight all the screws and door lock fixed.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!