Models > WSM2700WBWW

WSM2700WBWW General Electric Washer Dryer Combo

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WSM2700WBWW

Viewing 7 of 7
CONTROL PANEL Diagram and Parts List for General Electric Washer Dryer Combo
CONTROL PANEL
DRYER MOTOR, BLOWER & BELT Diagram and Parts List for General Electric Washer Dryer Combo
DRYER MOTOR, BLOWER & BELT
DRYER UPPER CABINET, DRUM & HEATER Diagram and Parts List for General Electric Washer Dryer Combo
DRYER UPPER CABINET, DRUM & HEATER
Section Diagram and Parts List for General Electric Washer Dryer Combo
Section
TRANSMISSION Diagram and Parts List for General Electric Washer Dryer Combo
TRANSMISSION
WASHER LOWER CABINET & TOP Diagram and Parts List for General Electric Washer Dryer Combo
WASHER LOWER CABINET & TOP
WASHER MOTOR & TUB Diagram and Parts List for General Electric Washer Dryer Combo
WASHER MOTOR & TUB

Manuals & Guides for WSM2700WBWW

Click to download
Manual
Owner's Manuals
(1.27MB)
Keep searches simple, eg. "belt" or "pump".
DRYER LINT FILTER – Part Number: WE16X29397
This is the replacement lint filter for your dryer. The lint filter traps unwanted lint and debris so your dryer can effectively dry your clothes.
No Longer Available
Timer Knob - Dryer – Part Number: WE01X10160
$72.17
Used with washer/dryer combo machines. This knob takes a D-shaped shaft.
On Order
Rear Bearing – Part Number: WE3X70
Bearing Only. This part helps your appliance run as quietly as possible.
No Longer Available
Dishwasher Hose Clamp Kit – Part Number: WH1X2036
$25.10
This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.
In Stock
Order now and your part arrives by Jun 4
Rear Bearing Shaft Support – Part Number: WE13X10011
$103.04
Special Order
DRYER BEARING BRACKET – Part Number: WE13X28680
This bracket is used on the drum bearing.
No Longer Available
Drain Pump – Part Number: WH23X10041
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
No Longer Available
V-Belt – Part Number: WH07X10009
$90.54
In Stock
Order now and your part arrives by Jun 4
High Limit Safety Thermostat – Part Number: WE4X757
$68.99
This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees...
In Stock
Order now and your part arrives by Jun 4
Agitator Drive Hub – Part Number: WH40X175
No Longer Available
Agitator - White – Part Number: WH43X119
No Longer Available
Dryer Screw 818 X .31 – Part Number: WR2X9494
This screw is sold individually. Size 8 - 18 x 0.31
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for WSM2700WBWW

Viewing 4 of 4
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing
How to fix it
Will not agitate
Fixed by these parts
Fixing Fixing
How to fix it
Will not drain
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jack from Canyon Lake, TX
Parts Used:
WH23X10041
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Washer would not drain
Removed 2 Hose clamps with pliers. Unplug power source from drain pump. Unscrew 2 mounting screws with 5/16" nut-driver then replace unit in reverse sequence...... Very simple.
29 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from chicago, IL
Parts Used:
WE16X29397
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
filter had a hole
simple replacement
14 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dave from Salt Lake City, UT
Parts Used:
WE01X10160
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Control knob had broken and we were unable to set the dryer
I first ordered the replacement knob. It had broken before and I had repaired using a steel washer and epoxy to support the cracked plastic. When the support system I installed broke, I suspected a deeper problem; increased resistance to knob rotation in the control system. I removed the front panel to get back at the switch area. I wanted to lubricate the whole control, but UT seemed to be well sealed. Finding a couple areas where the plastic came together, held by a permanent metal mount, I used a pressurized silicone lubricant and sprayed into the small spaces. That allowed for easier rotation of the control, hopefully giving a longer lifespan to the new knob. DO
Read less
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More