Models > GFWS1500D0WW

GFWS1500D0WW General Electric Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GFWS1500D0WW

Viewing 4 of 4
CABINET & TOP PANEL Diagram and Parts List for General Electric Washer
CABINET & TOP PANEL
CONTROLS & DISPENSER Diagram and Parts List for General Electric Washer
CONTROLS & DISPENSER
FRONT PANEL & DOOR Diagram and Parts List for General Electric Washer
FRONT PANEL & DOOR
TUB & MOTOR Diagram and Parts List for General Electric Washer
TUB & MOTOR

Manuals & Guides for GFWS1500D0WW

Click to download
Manual
Owner's Manuals
(8.07MB)
Manual
Owner's Manuals
(12.73MB)
Keep searches simple, eg. "belt" or "pump".
Door Lock Latch – Part Number: WH10X10006
$268.65
In Stock
PUMP – Part Number: WH11X34740
$93.26
The drain pump removes water from the washer during the drain portion of the cycle.
In Stock
GASKET OUTSIDE CLAMP – Part Number: WH01X10279
$30.00
In Stock
Door Strike – Part Number: WH01X10356
This part is the replacement door plunger or door strike for your washer. It is made of white plastic and is approximately 2 inches by 1.5 inches. The door strike attaches to the washer door and activ...
No Longer Available
KNOB – Part Number: WE04X21014
$23.38
In Stock
DRIVING BELT – Part Number: WH08X10050
$115.23
In Stock
GASKET INSIDE CLAMP – Part Number: WH01X10277
$28.66
In Stock
PUMP FILTER – Part Number: WH11X34741
$96.75
In Stock
INSIDE_DRAIN_HOSE – Part Number: WH41X10127
$54.82
In Stock
DRIVE PULLEY KIT – Part Number: WH07X10022
$126.42
In Stock
DAMPER PIN – Part Number: WH01X10261
$12.95
In Stock
Spring Hanger – Part Number: WH01X10251
$8.06
In Stock
View More

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
WILVENS
February 15, 2023
So apparently we bought this house and the owner left the washer machine, but the washer power doesn’t come on to anybody. Have any idea how to fix that it’s like brand new.
For model number GFWS1500D0WW
Fix.com logo
Hi Wilvens, thank you for reaching out. First of all, you should make sure the power cord is plugged in and the washer has the proper power supply. If it is fine, you need to check the following parts: power cord, part number FIX3487328, door lock latch, part number FIX1021459, drain pump, part number FIX16743374, and control board, part number FIX6011703. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
Interface Board
$572.20
In Stock
PUMP
$93.26
In Stock
POWER CORD
$82.33
Special Order

Common Problems and Symptoms for GFWS1500D0WW

Viewing 4 of 4
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Lid or door won’t close
Fixed by these parts
Fixing Fixing
How to fix it
Will not drain
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Replacing the Door Lock Latch

Replacing the Door Lock Latch

Replacing the GASKET INSIDE CLAMP

Replacing the GASKET INSIDE CLAMP

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Robert from Dallas, PA
Parts Used:
WH10X10006
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
"Door Locked" light always on. Washer would not run
Remove bottom kick plate of washer. Remove 4 screws behind door that hold the latch/lock assembly. Reach up inside the washer from underneath to unplug 3 wire connectors. (This is a very tight spot). Once wires are off, part comes right out. Connect wires to the new part - this is by far the most difficult part of the job because it is way up inside the washer. Replace all bolts.
Overall, pretty easy to do - just reconnecting the wires is a pain, but if you are patient it is not a big deal.
Read less
36 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Spring Branch, TX
Parts Used:
WH01X10356
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Door plunger broken so could not lock.
Part came quickly, was exactly what I needed, 2 minutes later, washing clothes again.
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jason from HARRIMAN, TN
Parts Used:
WH11X34740
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Washer stopped during wash cycle and wouldn't open.
Removed three 7mm sheet metal screws from the bottom front panel.
The drain pump is in the front right.
Removed the manual drain screen to drain residual water from the system. A bucket was necessary to collect all the water.
Disconnected the inlet and outlet hose.
Disconnected the electric supply.
Removed two Phi llips screws holding the pump to the bottom of the machine.
Slid the pump towards the rear to clear the support pegs and removed it from the front opening.
Installation is the reverse of those steps.
Read less
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More